EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and numerical study on the flexural capacity of fiber mesh fabric-reinforced RC slabs

Chunxiang Guo, Xiaoming Bao, Zhengge Shao, Shuai Yan, Xiangcheng Zhang iD, Chang Ge, Zhichun Wu, Ke Jiang

PLOS One · 18.05.2026 · 21 (5) · e0348872

DOI: 10.1371/journal.pone.0348872 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 18.05.2026. Verfasst von Chunxiang Guo und 7 weiteren Autor:innen. Beteiligte Einrichtung: 4th Construction Co., Ltd. of China Construction 5th Engineering Bureau, Luoyang, China. Hauptthemen laut MEDLINE: Glass, Construction Materials, Flexural Strength. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Key R & D and Promotion Special Project in Henan Province, Zhengzhou Foreign Expert Studio Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study experimentally investigates the effects of embedded carbon and glass fiber mesh fabrics on the flexural performance of one-way reinforced concrete (RC) slabs. Five slab specimens, incorporating different fiber types (carbon and glass) and areal densities (120 g/m 2 and 240 g/m 2 ), were subjected to four-point bending tests. The experimental results demonstrate that fiber mesh reinforcement significantly enhances the mechanical behavior of RC slabs, particularly in terms of cracking control and load-bearing capacity. In terms of crack development, fiber mesh fabrics-reinforced slabs exhibited denser and finer crack patterns, with the 240 g/m 2 carbon fiber mesh showing the narrowest crack widths and most effective suppression of crack propagation. Compared to the unreinforced control specimen, the cracking load of fiber mesh fabrics-reinforced slabs increased by 14.2% to 114.2%, yield load by 21.3% to 48.7%, and ultimate load by 1.4% to 21.4%. Among them, the specimen reinforced with 240 g/m 2 carbon fiber mesh exhibited the most substantial improvement, achieving 114.2% higher cracking load, 48.7% higher yield load, and 21.4% higher ultimate load. At the same areal density, carbon fiber mesh outperformed glass fiber mesh, providing up to 25% improvement in cracking load, 18.8% in yield load, and 16.6% in ultimate load. Increasing the areal density from 120 g/m 2 to 240 g/m 2 also enhanced flexural performance, with cracking load improvements of 50% observed for both glass and carbon fiber mesh fabrics-reinforced slabs. Finally, the finite element (FE) models of the slabs were developed using the ABAQUS software. The FE simulations accurately replicated the crack development, deflection behavior, and load-transfer mechanisms observed in the experiments, validating the model’s reliability. These results provide critical insights for optimizing the design of fiber-reinforced concrete slabs.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

GlassConstruction MaterialsFlexural StrengthCarbon FiberMaterials TestingCarbonStress, MechanicalPolymersSilicon Dioxide

Substanzen

Carbon FiberCarbonfiberglassPolymersSilicon Dioxide

Autor:innen und Institutionen

  • 4th Construction Co., Ltd. of China Construction 5th Engineering Bureau, Luoyang, China.
  • School of Civil Engineering, Zhengzhou University, Zhengzhou, China.
  • Zhengzhou University Industrial Technology Research Institute Co., Ltd, Zhengzhou, China.
  • School of Mechanics and Safety Engineering, Zhengzhou University, Zhengzhou, China.

ORCID-Profile: Xiangcheng Zhang

Förderung

  • the Key R & D and Promotion Special Project in Henan Province
  • Zhengzhou Foreign Expert Studio Project

Zitieren

APA

Guo, C., Bao, X., Shao, Z., Yan, S., Zhang, X., Ge, C., Wu, Z., & Jiang, K. (2026). Experimental and numerical study on the flexural capacity of fiber mesh fabric-reinforced RC slabs. PLOS One, 21(5), e0348872. https://doi.org/10.1371/journal.pone.0348872

Vancouver

Guo C, Bao X, Shao Z, Yan S, Zhang X, Ge C, et al. Experimental and numerical study on the flexural capacity of fiber mesh fabric-reinforced RC slabs. PLOS One. 2026;21(5):e0348872. doi:10.1371/journal.pone.0348872

BibTeX
@article{Guo2026,
  author = {Guo, Chunxiang and Bao, Xiaoming and Shao, Zhengge and Yan, Shuai and Zhang, Xiangcheng and Ge, Chang and Wu, Zhichun and Jiang, Ke},
  title = {Experimental and numerical study on the flexural capacity of fiber mesh fabric-reinforced RC slabs},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {5},
  pages = {e0348872},
  doi = {10.1371/journal.pone.0348872}
}
Kostenlos starten →