EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A strength reliability calculation method of tip relief gears

Hongbing Wang, Jun Xiao, Lairong Yin, Bo Hu iD, Huihua Liu

PLOS One · 14.05.2026 · 21 (5) · e0348272

DOI: 10.1371/journal.pone.0348272 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 14.05.2026. Verfasst von Hongbing Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Hunan Provincial Key Laboratory of Safety Design and Reliability Technology for Engineering Vehicle, Changsha University of Science and Technology, C…. Hauptthemen laut MEDLINE: Materials Testing. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Hunan Province, Science and Technology Innovation Program of Hunan Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The gear tip relief affects the root bending stress and the contact pressure, which affects the strength reliability of the gear system. In this work, based on the proposed tip relief model and the mesh model of the gear pair, incorporating the gear’s contact strength and bending strength models together with the stress–strength interference theory, a strength reliability model of tip relief gears was established by assuming that both the stress and strength follow a normal distribution. The results indicate that the tip relief reduces the meshing impact and increases the strength reliability. Then, the effects of the modification length, the modification height, and the applied load on the gear strength reliability were analyzed. It was found that with the increase in gear modification length and the modification height, both the contact and bending strength reliability at the engaging-in and the recession points decrease compared to the standard gears. Additionally, an increasing of the load also results in a decline in gear strength reliability. Therefore, the rational control of the gear loading and the appropriate selection of modification length and modification height are of great significance in reducing meshing impact while ensuring the strength reliability of gears.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Materials TestingStress, MechanicalReproducibility of ResultsModels, TheoreticalEquipment Design

Autor:innen und Institutionen

  • Hunan Provincial Key Laboratory of Safety Design and Reliability Technology for Engineering Vehicle, Changsha University of Science and Technology, Changsha, P. R. China.
  • Mechanical Industry Key Laboratory of Medium and Small Sized Joints in Robots, Guangdong Desheng Intelligent Technology Co., Ltd, Foshan, P. R. China.
  • Beijing Engineering Research Center of Precision Measurement Technology and Instruments, Beijing University of Technology, Beijing, P. R. China.

ORCID-Profile: Bo Hu

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Hunan Province
  • Science and Technology Innovation Program of Hunan Province

Zitieren

APA

Wang, H., Xiao, J., Yin, L., Hu, B., & Liu, H. (2026). A strength reliability calculation method of tip relief gears. PLOS One, 21(5), e0348272. https://doi.org/10.1371/journal.pone.0348272

Vancouver

Wang H, Xiao J, Yin L, Hu B, Liu H. A strength reliability calculation method of tip relief gears. PLOS One. 2026;21(5):e0348272. doi:10.1371/journal.pone.0348272

BibTeX
@article{Wang2026,
  author = {Wang, Hongbing and Xiao, Jun and Yin, Lairong and Hu, Bo and Liu, Huihua},
  title = {A strength reliability calculation method of tip relief gears},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {5},
  pages = {e0348272},
  doi = {10.1371/journal.pone.0348272}
}
Kostenlos starten →