Design and experimental validation of multi-section directional coupler with arbitrary coupling and high directivity for sub-6 GHz UWB applications
PLOS One · 08.05.2026 · 21 (5) · e0347748
DOI: 10.1371/journal.pone.0347748 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 08.05.2026. Verfasst von Shrawan K Patel und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronics and Communication Engineering, School of Engineering and Technology, GGV Bilaspur, Chhattisgarh, India. Hauptthemen laut MEDLINE: Microwaves. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This work presents a geometrically simple topology for developing an ultra-wideband directional coupler with improved coupling and directivity. A short-ended coupled-line structure is used to achieve an ultra-wideband, tightly coupled symmetric three-section coupler using the microstrip line technology. The proposed design demonstrates an explicit improvement of approximately 1.2 dB in coupling compared to conventional multi-section directional couplers. Calculated, simulated, and measured responses validate the effectiveness of the proposed configuration in terms of low-ripple coupling bandwidth, low insertion loss, and improved directivity performance compared to respective responses of the conventional structure. Couplers featuring a higher number of sections to implement different bandwidths and couplings can be fabricated using the presented structure due to its transmission line-based approach. A prototype of the three-section directional coupler with coupling of 7.6 dB, 8.1 dB, and 8.3 dB and corresponding bandwidths of 104%, 123% and 133% is designed, fabricated, and measured. The experimental results confirm that the coupler can reliably achieve higher coupling with ultra-wideband response from 0.75 GHz to 3.75 GHz (5:1) with 8.3 ± 1.4 dB (ripple). Additionally, the design yields promising performance with return loss > 16 dB, isolation > 20 dB, a phase difference of 90 ± 4°, and directivity > 30 dB, and the maximum circuit size is 0.067λ 0 2 . This work aligns with SDG 9: Industry, Innovation and Infrastructure by advancing high-performance microwave components that support efficient, reliable, and scalable communication infrastructure.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- Department of Electronics and Communication Engineering, School of Engineering and Technology, GGV Bilaspur, Chhattisgarh, India.
- Department of Electronics and Communication Engineering, School of Engineering and Technology, CHRIST University, Bangalore, India.
- Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, India.
- Engineering Optimization and Modeling Center, Reykjavik University, Reykjavik, Iceland.
- Faculty of Electronics, Telecommunications and Informatics, Gdansk University of Technology, Gdansk, Poland.
ORCID-Profile: Shrawan K Patel, Rusan Kumar Barik, Niraj Kumar Dewangan, Slawomir Koziel
Zitieren
APA
Patel, S. K., Barik, R. K., Dewangan, N. K., & Koziel, S. (2026). Design and experimental validation of multi-section directional coupler with arbitrary coupling and high directivity for sub-6 GHz UWB applications. PLOS One, 21(5), e0347748. https://doi.org/10.1371/journal.pone.0347748
Vancouver
Patel SK, Barik RK, Dewangan NK, Koziel S. Design and experimental validation of multi-section directional coupler with arbitrary coupling and high directivity for sub-6 GHz UWB applications. PLOS One. 2026;21(5):e0347748. doi:10.1371/journal.pone.0347748
BibTeX
@article{Patel2026,
author = {Patel, Shrawan K and Barik, Rusan Kumar and Dewangan, Niraj Kumar and Koziel, Slawomir},
title = {Design and experimental validation of multi-section directional coupler with arbitrary coupling and high directivity for sub-6 GHz UWB applications},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {5},
pages = {e0347748},
doi = {10.1371/journal.pone.0347748}
}
EUVIMED