EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hybrid additive manufacturing and data-guided design optimization for graded anterior cruciate ligament engineering

Simone Micalizzi iD, Alberto Bevilacqua, Luca Di Stefano iD, Francesco De Gaetano, Federica Potere iD, Arianna Callera, Edoardo D'Imprima iD, Martin Centola iD, Alberto Favaro iD, Daniele D'Arrigo iD, Tommaso Bonanzinga, Maurilio Marcacci und 1 weitere

Biomedical Materials · 01.02.2026 · 21 (1) · 015013

DOI: 10.1088/1748-605x/ae30bc ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomedical Materials, online erschienen am 07.01.2026. Verfasst von Simone Micalizzi und 12 weiteren Autor:innen. Beteiligte Einrichtung: IRCCS Humanitas Research Hospital, Via Alessandro Manzoni, 56, 20089 Rozzano, Milano, Italy. Hauptthemen laut MEDLINE: Tissue Engineering, Anterior Cruciate Ligament, Tissue Scaffolds. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Humanitas University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Interface tissues, such as the enthesis connecting ligaments to bone, present multiphasic architectures with continuous gradients in structure, composition, and mechanics. Engineering such complex transitions remains a major challenge in biofabrication. This study aims to develop a hybrid manufacturing and machine learning (ML)-guided design strategy to create functionally graded scaffolds for anterior cruciate ligament (ACL) reconstruction. A hybrid biofabrication platform was used to integrate extrusion-based three-dimensional printing and electrospinning within a single workflow. Polycaprolactone was used as the common biomaterial for both modalities. Four scaffold designs, varying in electrospun midsection length, slit patterning, and core geometry, were fabricated to replicate the native ACL’s zonal architecture. Scaffolds were characterized through scanning electron microscopy (SEM) and uniaxial tensile testing. Resulting data were used to train a ML model to predict mechanical performance from geometric features. The model was then used to generate a fifth scaffold design optimized for enhanced performance. The hybrid process successfully fabricated multiscale scaffolds with integrated bone-like, enthesis-like, and ligament-like regions. SEM confirmed morphological integration between printed and electrospun structures. Mechanical testing revealed design-dependent variations in strength and stiffness. The ML model identified slit number and outer diameter as key predictors and guided the design of an optimized scaffold that combined the compliance of slitted geometries with enhanced mechanical strength. The ML-optimized scaffold achieved the highest tensile force among the slitted designs and improved stiffness compared to the other slitted configurations this study demonstrates a predictive and performance-driven biofabrication strategy that integrates hybrid additive manufacturing and ML. The approach enables rational scaffold optimization, reduces empirical iterations, and supports the development of biomimetic constructs for soft-to-hard tissue engineering. While focused on ACL reconstruction, the workflow is adaptable to a wide range of tissue interfaces.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue EngineeringAnterior Cruciate LigamentTissue ScaffoldsPrinting, Three-DimensionalPolyestersTensile StrengthBiocompatible MaterialsAnterior Cruciate Ligament ReconstructionMaterials TestingMachine LearningHumansMicroscopy, Electron, Scanning

Stichwörter der Autor:innen

enthesisgraded scaffoldhybrid additive manufacturingligament scaffoldmachine learning-guided designmultiscale tissue engineering

Substanzen

PolyesterspolycaprolactoneBiocompatible Materials

Autor:innen und Institutionen

  • IRCCS Humanitas Research Hospital, Via Alessandro Manzoni, 56, 20089 Rozzano, Milano, Italy.
  • Department of Chemistry, Materials and Chemical Engineering 'Giulio Natta', Politecnico di Milano, Milan, Italy.
  • Department of Biomedical Sciences, Humanitas University, Via Rita Levi Montalcini 4, Pieve Emanuele, 20072 Milan, Italy.

ORCID-Profile: Simone Micalizzi, Luca Di Stefano, Federica Potere, Edoardo D'Imprima, Martin Centola, Alberto Favaro, Daniele D'Arrigo, Paolo Oliva

Förderung

  • Humanitas University

Zitieren

APA

Micalizzi, S., Bevilacqua, A., Stefano, L. D., Gaetano, F., Potere, F., Callera, A., D'Imprima, E., Centola, M., Favaro, A., D'Arrigo, D., Bonanzinga, T., Marcacci, M., & Oliva, P. (2026). Hybrid additive manufacturing and data-guided design optimization for graded anterior cruciate ligament engineering. Biomedical Materials, 21(1), 015013. https://doi.org/10.1088/1748-605x/ae30bc

Vancouver

Micalizzi S, Bevilacqua A, Stefano LD, Gaetano F, Potere F, Callera A, et al. Hybrid additive manufacturing and data-guided design optimization for graded anterior cruciate ligament engineering. Biomedical Materials. 2026;21(1):015013. doi:10.1088/1748-605x/ae30bc

BibTeX
@article{Micalizzi2026,
  author = {Micalizzi, Simone and Bevilacqua, Alberto and Stefano, Luca Di and Gaetano, Francesco De and Potere, Federica and Callera, Arianna and D'Imprima, Edoardo and Centola, Martin and Favaro, Alberto and D'Arrigo, Daniele and Bonanzinga, Tommaso and Marcacci, Maurilio and Oliva, Paolo},
  title = {Hybrid additive manufacturing and data-guided design optimization for graded anterior cruciate ligament engineering},
  journal = {Biomedical Materials},
  year = {2026},
  volume = {21},
  number = {1},
  pages = {015013},
  doi = {10.1088/1748-605x/ae30bc}
}
Kostenlos starten →