EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An adaptive slicing algorithm based on model contour information

Xingguo Han, Xuan Liu iD, Kunteng Lu, Lixiu Cui

PLOS One · 08.04.2026 · 21 (4) · e0344508

DOI: 10.1371/journal.pone.0344508 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 08.04.2026. Verfasst von Xingguo Han und 3 weiteren Autor:innen. Beteiligte Einrichtung: Guangxi Key Laboratory of Special Engineering Equipment and Control, Guilin University of Aerospace Technology, Guilin, Guangxi, China. Hauptthemen laut MEDLINE: Algorithms, Models, Theoretical, Printing, Three-Dimensional. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Guangxi Zhuang Autonomous Region, Jiangsu Provincial Key Research and Development Program, GUAT Special Research on the Strategic Development of Distinctive Interdisciplinary Fields.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The original slicing algorithm needs to traverse all triangular facets when performing triangular facet screening, and the calculation amount is large. When performing model feature recognition, the feature standard is less, resulting in inaccurate feature recognition and the phenomenon that the position of the model feature moves. To solve these problems, an adaptive hierarchical algorithm based on model contour information is proposed. This algorithm is applicable to fused deposition additive manufacturing. By analyzing the geometric characteristics of the STL (Standard Triangulated Language) model, the model is divided into non-significant feature part, general feature part and complex feature part by using the change of contour intersection point number. For the model with non-significant feature part, the angle between the normal vector of the triangular patch and the stratification direction is used as the basis of slicing. For the model of the general feature part, the angle between the normal vectors of the adjacent triangular patches in this part is used as the basis of slicing algorithm. For the model of complex feature part, the index based on Taubin vertex normal vector is used as the basis of slicing algorithm. The equal thickness slicing algorithm, the adaptive slicing algorithm based on the normal vector of triangular facets and the algorithm proposed in this paper are used to slice the ship model, vase model and dice model respectively. The models are printed by the six-degree-of-freedom (six-DOF) additive manufacturing (AM) device and tested by a roughness meter. The experimental results show that the proposed method can better balance the printing accuracy and printing efficiency.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AlgorithmsModels, TheoreticalPrinting, Three-DimensionalAdaptive Algorithms

Autor:innen und Institutionen

  • Guangxi Key Laboratory of Special Engineering Equipment and Control, Guilin University of Aerospace Technology, Guilin, Guangxi, China.
  • School of Mechanical and Electrical Engineering, Guilin University of Electronic Technology, Guilin, Guangxi, China.
  • Key Laboratory of Special Engineering Equipment Design and Intelligent Driving Technology, Education Department of Guangxi Zhuang Autonomous Region, Guilin University of Aerospace Technology, Guilin, Guangxi, China.

ORCID-Profile: Xuan Liu

Förderung

  • Natural Science Foundation of Guangxi Zhuang Autonomous Region
  • Jiangsu Provincial Key Research and Development Program
  • GUAT Special Research on the Strategic Development of Distinctive Interdisciplinary Fields
  • National Natural Science Foundation of China

Zitieren

APA

Han, X., Liu, X., Lu, K., & Cui, L. (2026). An adaptive slicing algorithm based on model contour information. PLOS One, 21(4), e0344508. https://doi.org/10.1371/journal.pone.0344508

Vancouver

Han X, Liu X, Lu K, Cui L. An adaptive slicing algorithm based on model contour information. PLOS One. 2026;21(4):e0344508. doi:10.1371/journal.pone.0344508

BibTeX
@article{Han2026,
  author = {Han, Xingguo and Liu, Xuan and Lu, Kunteng and Cui, Lixiu},
  title = {An adaptive slicing algorithm based on model contour information},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {4},
  pages = {e0344508},
  doi = {10.1371/journal.pone.0344508}
}
Kostenlos starten →