EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Predicting and optimizing control parameters of stir casting of Al alloy/MWCNT/RHA composite using artificial neural network and Taguchi-Grey relational analysis for multi-objective outcomes

Nitin Srivastava, Manoj Kumar Yadav, Selsam Ajith Arul Daniel, Alok Bhadauria iD, Lavish Kumar Singh

PLOS One · 12.03.2026 · 21 (3) · e0343970

DOI: 10.1371/journal.pone.0343970 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 12.03.2026. Verfasst von Nitin Srivastava und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Sharda University, Greater Noida, Uttar Pradesh, India. Hauptthemen laut MEDLINE: Neural Networks, Computer, Alloys, Aluminum, Nanotubes, Carbon. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present investigation, the influence of various casting parameters viz. stirrer time, stirrer speed, and processing temperature and reinforcement content on the mechanical properties of AlP0507/CNT/RHA composite is assessed. The optimum parameter combination that produces greater multi-objective performance was obtained using the GRA method. The comparison of all R 2 -score showed that the ANN model is best fitted to predict the tensile strength of HAMMC with highest R 2 - score of 99.65%. GRA established that the MWCNT content has most significant influence on the response parameters followed by stirring time, RHA content, stirring speed and processing temperature; and the best properties of stir cast HAMMCs was obtained by the combination A2B3C3D2E2. ANNOVA performed on GRA indicated that MWCNT content with contribution of 48.26% exerted maximum impact on the properties of the fabricated HAMMC, followed by stirring time with contribution 19.4%. Processing temperature contributed least with meagre contribution of 2.17%. The predicted value of GRG (0.830775) was found very close to the GRG value of the highest-ranked experiment (0.79643454) confirming the accuracy of the optimization and its validation. The improvement in GRG value by 0.09792454 shows that the optimized parameters provided the optimal results and can be recommended.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Neural Networks, ComputerAlloysAluminumNanotubes, CarbonTensile StrengthTemperatureMaterials Testing

Substanzen

AlloysAluminumNanotubes, Carbon

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Sharda University, Greater Noida, Uttar Pradesh, India.
  • Department of Mechanical Engineering, Ajay Kumar Garg Engineering College, Ghaziabad, Uttar Pradesh, India.
  • Department of Mechanical Engineering, Vels Institute of Science, Technology and Advanced Studies, Chennai, Tamil Nadu, India.
  • Department of Mechanical and Industrial Engineering, Manipal Institute of Technology Bengaluru, Manipal Academy of Higher Education, Manipal, Karnataka, India.
  • School of Engineering, Jawaharlal Nehru University, New Delhi, Delhi, India.

ORCID-Profile: Alok Bhadauria

Zitieren

APA

Srivastava, N., Yadav, M. K., Daniel, S. A. A., Bhadauria, A., & Singh, L. K. (2026). Predicting and optimizing control parameters of stir casting of Al alloy/MWCNT/RHA composite using artificial neural network and Taguchi-Grey relational analysis for multi-objective outcomes. PLOS One, 21(3), e0343970. https://doi.org/10.1371/journal.pone.0343970

Vancouver

Srivastava N, Yadav MK, Daniel SAA, Bhadauria A, Singh LK. Predicting and optimizing control parameters of stir casting of Al alloy/MWCNT/RHA composite using artificial neural network and Taguchi-Grey relational analysis for multi-objective outcomes. PLOS One. 2026;21(3):e0343970. doi:10.1371/journal.pone.0343970

BibTeX
@article{Srivastava2026,
  author = {Srivastava, Nitin and Yadav, Manoj Kumar and Daniel, Selsam Ajith Arul and Bhadauria, Alok and Singh, Lavish Kumar},
  title = {Predicting and optimizing control parameters of stir casting of Al alloy/MWCNT/RHA composite using artificial neural network and Taguchi-Grey relational analysis for multi-objective outcomes},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {3},
  pages = {e0343970},
  doi = {10.1371/journal.pone.0343970}
}
Kostenlos starten →