Predicting CO2 emissions and strength of FA-SF geopolymer mortar: An ANN approach for sustainable construction
PLOS One · 2026
DOI: 10.1371/journal.pone.0336654 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, 2026. Verfasst von Jahanzeb Javed und 6 weiteren Autor:innen. Beteiligte Einrichtung: Belfast School of Architecture and the Built Environment, Ulster University, Belfast, Northern Ireland, United Kingdom. Hauptthemen laut MEDLINE: Carbon Dioxide, Construction Materials, Coal Ash, Neural Networks, Computer. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deanship of Graduate Studies and Scientific Research at Jouf University.
Abstract (Originalsprache)
The construction industry is facing increasing pressure to reduce the CO 2 emissions from conventional cement manufacturing. Geopolymer concrete, utilizing fly ash (FA) and silica fume (SF) as precursors, presents a promising sustainable alternative. This study investigates the mechanical properties and environmental performance of FA- and SF-based GPC through a comprehensive experimental campaign and predictive modeling. This study conducted destructive (DT) and non-destructive testing (ultrasonic pulse velocity [UPV] measurement) of the fresh and hardened properties of GPC, focusing on the effect of steel fiber reinforcement on flexural strength and resilience. Based on life cycle assessment, artificial neural networks (ANNs) were used to predict both mechanical properties and CO 2 emissions of GPC mixes. The ANN models demonstrated accurate predictions (R² = 0.96–0.99) and exhibited low errors. A SHAP-based sensitivity analysis identified key input parameters influencing ANN predictions. From the results, it can be concluded that optimized GPC mixes containing FA and SF can achieve gains of 20–25% in early-age compressive strength and a 15–20% reduction in CO 2 emissions compared to OPC. The findings of this research are significant for designing long-life, high-performance GPC mixes. The resulting ANN-based predictive tool provides a practical approach for engineers and materials scientists to design GPC mixes that meet specific performance requirements and sustainability objectives, thereby promoting the development of low-carbon construction materials.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Belfast School of Architecture and the Built Environment, Ulster University, Belfast, Northern Ireland, United Kingdom.
- Civil and Building Services Engineering Division, School of Built Environment and Architecture, London South Bank University, London, United Kingdom.
- School of Naval Architecture & Ocean Engineering, Jiangsu University of Science and Technology, Zhenjiang, Jiangsu, China.
- Department of Civil Engineering, Northern Border University, Arar, Saudi Arabia.
- Department of Disaster Mitigation for Structures, Tongji University, Shanghai, China.
- School of Civil Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai, Johor Bahru, Malaysia.
ORCID-Profile: Muhammad Usama Aslam, Ahmed M Yosri
Förderung
- Deanship of Graduate Studies and Scientific Research at Jouf University
Zitieren
APA
Javed, J., Siddiq, M. U., Akbar, M., Aslam, M. U., Sadiq, A. N., Elkady, M., & Yosri, A. M. (2026). Predicting CO2 emissions and strength of FA-SF geopolymer mortar: An ANN approach for sustainable construction. PLOS One. https://doi.org/10.1371/journal.pone.0336654
Vancouver
Javed J, Siddiq MU, Akbar M, Aslam MU, Sadiq AN, Elkady M, et al. Predicting CO2 emissions and strength of FA-SF geopolymer mortar: An ANN approach for sustainable construction. PLOS One. 2026. doi:10.1371/journal.pone.0336654
BibTeX
@article{Javed2026,
author = {Javed, Jahanzeb and Siddiq, Muhammad Usman and Akbar, Muhammad and Aslam, Muhammad Usama and Sadiq, Abdullah Naveed and Elkady, Mahmoud and Yosri, Ahmed M},
title = {Predicting CO2 emissions and strength of FA-SF geopolymer mortar: An ANN approach for sustainable construction},
journal = {PLOS One},
year = {2026},
doi = {10.1371/journal.pone.0336654}
}
EUVIMED