EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Estimation of compressive strength of ultra-high performance lightweight concrete (UHPLC) using neural network

Yan Zhao, Ziyan Huang, Huilong Zhao, Zhen Xu, Wei Chang iD, Bai Liu

PLOS One · 2025

DOI: 10.1371/journal.pone.0326652 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2025. Verfasst von Yan Zhao und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering and Architecture, Wuyi University, Wuyishan City, Fujian Province, China. Hauptthemen laut MEDLINE: Construction Materials, Neural Networks, Computer, Compressive Strength. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fujian Provincial transportation technology project, Nanping City resource chemical industry science and technology innovation joint funding project, Wuyi University to introduce talents research start-up funding project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High strength and lightweight are key trends in concrete development. Achieving a balance between these properties to produce high structural efficiency (strength-to-weight ratio) concrete is challenging due to the complex relationship between compressive strength and material components. In this study, two artificial neural network (ANN) models-the BP and Elman networks were used to predict the compressive strength of ultra-high-performance lightweight concrete (UHPLC), based on a robust database of 115 test datasets from previous studies. The investigated parameters included the cement grade (Grade 42.5 and Grade 52.5), cement content (352 kg/m 3 -938 kg/m 3 ), silica fume content (0 kg/m 3 -350 kg/m 3 ), fly ash content (0 kg/m 3 -220 kg/m 3 ), microsphere content (0 kg/m 3 -624 kg/m 3 ), lightweight sand types (pottery sand, expanded perlite sand, and expanded shale lightweight sand), lightweight sand content (0 kg/m 3 -769 kg/m 3 ), sand type (quartz sand, river sand), sand content (0 kg/m 3 -1314 kg/m 3 ), water (90 kg/m 3 -395 kg/m 3 ), water reduce (0 kg/m 3 -42.8 kg/m 3 ), steel fiber content (0 kg/m 3 -234 kg/m 3 ). Correlation analysis and sensitive analysis indicated that lightweight sand content and sand content had the most significant effects on UHPLC compressive strength, followed by water content. Conversely, fly ash content and lightweight sand type had minimal impact. The developed ANN models for UHPLC compressive strength demonstrated high predictive accuracy for both training and testing datasets, which the RMSE of BP network and Elman network were 0.226 and 0.160, respectively, while R 2 of both two developed models were more than 0.98. Additionally, UHPLC exhibited a higher compressive strength-to-density ratio than high-strength concrete, ultra-high-performance concrete, and even Q235 steel. Three strategies were proposed for creating ultra-high-performance lightweight composites: optimizing packing density and lowering the water-binder ratio, along with careful selection of lightweight aggregates.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Construction MaterialsNeural Networks, ComputerCompressive StrengthSandCoal AshMaterials Testing

Substanzen

SandCoal Ash

Autor:innen und Institutionen

  • School of Civil Engineering and Architecture, Wuyi University, Wuyishan City, Fujian Province, China.
  • Nanping Highway Development Center, Nanping City, Fujian Province, China.
  • School of Civil Engineering, Harbin Institute of Technology, Harbin, China.
  • School of Electrical Engineering and Automation, Harbin Institute of Technology, Harbin, Heilongjiang, China.

ORCID-Profile: Wei Chang

Förderung

  • Fujian Provincial transportation technology project
  • Nanping City resource chemical industry science and technology innovation joint funding project
  • Wuyi University to introduce talents research start-up funding project
  • Innovative training program for college students

Zitieren

APA

Zhao, Y., Huang, Z., Zhao, H., Xu, Z., Chang, W., & Liu, B. (2025). Estimation of compressive strength of ultra-high performance lightweight concrete (UHPLC) using neural network. PLOS One. https://doi.org/10.1371/journal.pone.0326652

Vancouver

Zhao Y, Huang Z, Zhao H, Xu Z, Chang W, Liu B. Estimation of compressive strength of ultra-high performance lightweight concrete (UHPLC) using neural network. PLOS One. 2025. doi:10.1371/journal.pone.0326652

BibTeX
@article{Zhao2025,
  author = {Zhao, Yan and Huang, Ziyan and Zhao, Huilong and Xu, Zhen and Chang, Wei and Liu, Bai},
  title = {Estimation of compressive strength of ultra-high performance lightweight concrete (UHPLC) using neural network},
  journal = {PLOS One},
  year = {2025},
  doi = {10.1371/journal.pone.0326652}
}
Kostenlos starten →