EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of a novel tri-axis ZnO nanowires based piezoelectric accelerometer

Muhammad Sohaib Khan, Hassan Elahi iD, Muhammad Mubasher Saleem, Masood Ur Rehman, Muhammad Abdullah Tayyab, Mohsin Islam Tiwana

PLOS ONE · 2025

DOI: 10.1371/journal.pone.0318069 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2025. Verfasst von Muhammad Sohaib Khan und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechatronics Engineering, National University of Sciences and Technology, Islamabad, Pakistan. Hauptthemen laut MEDLINE: Zinc Oxide, Accelerometry, Nanowires, Micro-Electrical-Mechanical Systems. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Micro-Electromechanical Systems (MEMS) are pivotal in modern technology, serving as components like accelerometers, gyroscopes, and pressure sensors in various applications. MEMS accelerometers are key components used for measuring motion and vibrations in a wide range of systems. This paper presents the proposed design of a ZnO nanowires-based piezoelectric accelerometer. Owing to the ZnO nanowires’ unique piezoelectric properties, the accelerometer can measure acceleration in three axes. A mathematical model is derived to analyze the behavior of nanowires under applied acceleration. Finite Element Method (FEM) simulations were carried out to evaluate the performance of the accelerometer. The key parameters of the accelerometer such as mechanical deformation, stress, voltage, and sensitivity are evaluated while applying a dynamic acceleration of 0.1 g and static acceleration of up to 50 g. The simulation results show a sensitivity of 0.25 V/g for an applied acceleration in the x and y axes (in-plane acceleration) and 1.40 V/g sensitivity was achieved in the z-axis (out-of-plane acceleration). The acceleration analysis reveals that the range and sensitivity of the sensor are high, that it can measure acceleration in three axes, and it also shows a linear behavior under static acceleration. The proposed accelerometer’s tri-axis acceleration sensing and self-powered capability make it an excellent choice for integration in biomedical applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Zinc OxideAccelerometryNanowiresMicro-Electrical-Mechanical SystemsFinite Element AnalysisEquipment DesignAccelerationModels, Theoretical

Substanzen

Zinc Oxide

Autor:innen und Institutionen

  • Department of Mechatronics Engineering, National University of Sciences and Technology, Islamabad, Pakistan.

ORCID-Profile: Hassan Elahi

Zitieren

APA

Khan, M. S., Elahi, H., Saleem, M. M., Rehman, M. U., Tayyab, M. A., & Tiwana, M. I. (2025). Design of a novel tri-axis ZnO nanowires based piezoelectric accelerometer. PLOS ONE. https://doi.org/10.1371/journal.pone.0318069

Vancouver

Khan MS, Elahi H, Saleem MM, Rehman MU, Tayyab MA, Tiwana MI. Design of a novel tri-axis ZnO nanowires based piezoelectric accelerometer. PLOS ONE. 2025. doi:10.1371/journal.pone.0318069

BibTeX
@article{Khan2025,
  author = {Khan, Muhammad Sohaib and Elahi, Hassan and Saleem, Muhammad Mubasher and Rehman, Masood Ur and Tayyab, Muhammad Abdullah and Tiwana, Mohsin Islam},
  title = {Design of a novel tri-axis ZnO nanowires based piezoelectric accelerometer},
  journal = {PLOS ONE},
  year = {2025},
  doi = {10.1371/journal.pone.0318069}
}
Kostenlos starten →