Single-Thermocouple Suspended Microfluidic Thermal Sensor with Improved Heat Retention for the Development of Multifunctional Biomedical Detection
Sensors · 2025
DOI: 10.3390/s25154532 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Lin Qin und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Sichuan University, Chengdu 610065, China. Hauptthemen laut MEDLINE: Thermography, Biosensing Techniques, Microfluidics. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, International Cooperation Project of Sichuan Province, Chengdu Eastern New District Technology Innovation and Research and Development Project.
Abstract (Originalsprache)
Thermal sensors are widely used in medical, industrial and other fields, where the requirements for high sensitivity and portability continues to increase. Here we propose a suspended bridge structure fabricated using MEMS, which effectively shrinks the size and reduces heat loss. This study reviews current sensor-related theories of heat conduction, convective heat transfer and thermal radiation. Heat loss models for suspended and non-suspended bridge structures are established, and finite element analysis is conducted to evaluate their thermal performance. The thermal performance of the suspended bridge structure is further validated through infrared temperature measurements on the manufactured sensor device. Theoretical calculations demonstrate that the proposed suspension bridge structure reduces heat loss by 88.64% compared with traditional designs. Benefiting from this improved heat retention, which was also confirmed by infrared thermography, the thermal sensor fabricated based on the suspension bridge structure achieves an ultra-high sensitivity of 0.38 V/W and a fast response time of less than 200 ms, indicating a high accuracy in thermal characterization. The correlation coefficient obtained for the sensor output voltage and input power of the sensor is approximately 1.0. Based on this design, multiple microfluidic channels with suspended bridge structures can be integrated to realize multi-component detection, which is important for the development of multifunctional biomedical detection.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Sichuan University, Chengdu 610065, China.
- Med+X Center for Manufacturing, West China Hospital, Sichuan University, Chengdu 610041, China.
- Graduate School of International Cultural Studies, Tohoku University, Sendai 980-5877, Japan.
ORCID-Profile: Yubo Huang, Zhuqing Wang
Förderung
- National Key Research and Development Program of China
- International Cooperation Project of Sichuan Province
- Chengdu Eastern New District Technology Innovation and Research and Development Project
Zitieren
APA
Qin, L., Wang, X., Wu, C., Ju, Y., Zhang, H., Cheng, X., Xia, Y., Xia, C., Huang, Y., & Wang, Z. (2025). Single-Thermocouple Suspended Microfluidic Thermal Sensor with Improved Heat Retention for the Development of Multifunctional Biomedical Detection. Sensors. https://doi.org/10.3390/s25154532
Vancouver
Qin L, Wang X, Wu C, Ju Y, Zhang H, Cheng X, et al. Single-Thermocouple Suspended Microfluidic Thermal Sensor with Improved Heat Retention for the Development of Multifunctional Biomedical Detection. Sensors. 2025. doi:10.3390/s25154532
BibTeX
@article{Qin2025,
author = {Qin, Lin and Wang, Xiasheng and Wu, Chenxi and Ju, Yuan and Zhang, Hao and Cheng, Xin and Xia, Yuanlin and Xia, Cao and Huang, Yubo and Wang, Zhuqing},
title = {Single-Thermocouple Suspended Microfluidic Thermal Sensor with Improved Heat Retention for the Development of Multifunctional Biomedical Detection},
journal = {Sensors},
year = {2025},
doi = {10.3390/s25154532}
}
EUVIMED