EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of co-blending fly ash and ceramic waste powder on the performance and microstructure of cementitious substrates under sulfate dry-wet cycle attack

Xinyan Wang, Lu Zhang iD, Haizhou Li

PLOS ONE · 2025

DOI: 10.1371/journal.pone.0314277 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2025. Verfasst von Xinyan Wang und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering and Geomatics, Shandong University of Technology, Zibo, China. Hauptthemen laut MEDLINE: Ceramics, Coal Ash, Sulfates, Construction Materials. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Shandong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the properties of cement-based materials incorporating composite additions of fly ash and ceramic waste powder (CWP) as supplementary cementitious materials (SCM). The resistance of the materials to sulfate erosion under dry-wet cycling conditions was investigated through experimental testing. A Box-Behnken Design was employed to establish a model using three factors: the replacement ratio of cement by SCMs, the mass ratio of CWP to SCMs, and the water-to-binder ratio. The response variable was the mass loss rate due to sulfate erosion after 24 cycles of dry-wet cycling. Significance analysis of single-factor and multiple-factor interactions was conducted based on the response surface model. The research findings indicate that the cement-based materials with combined additions of fly ash and CWP exhibit optimal resistance to sulfate erosion under dry-wet cycling conditions. The water-to-binder ratio was identified as the most significant factor affecting the corrosion resistance of the cement-based materials at 7 days of curing. The dosage of ceramic waste powder influenced the corrosion performance of the cement-based materials at 28 days of curing. The content of SCMs affected the corrosion resistance of the cement-based materials after 56 days of curing. Comparative analysis of the grayscale three-dimensional distribution map and histogram of the cement-based materials with SCMs revealed an increase in the compactness of the matrix.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CeramicsCoal AshSulfatesConstruction MaterialsPowdersMaterials TestingCorrosionWater

Substanzen

Coal AshSulfatesPowdersWater

Autor:innen und Institutionen

  • School of Civil Engineering and Geomatics, Shandong University of Technology, Zibo, China.
  • Key Laboratory for Liquid-Solid Structural Evolution & Processing of Materials of Ministry of Education, Shandong University, Jinan, China.
  • School of Resources and Environmental Engineering, Shandong University of Technology, Zibo, China.

ORCID-Profile: Lu Zhang

Förderung

  • Natural Science Foundation of Shandong Province

Zitieren

APA

Wang, X., Zhang, L., & Li, H. (2025). Influence of co-blending fly ash and ceramic waste powder on the performance and microstructure of cementitious substrates under sulfate dry-wet cycle attack. PLOS ONE. https://doi.org/10.1371/journal.pone.0314277

Vancouver

Wang X, Zhang L, Li H. Influence of co-blending fly ash and ceramic waste powder on the performance and microstructure of cementitious substrates under sulfate dry-wet cycle attack. PLOS ONE. 2025. doi:10.1371/journal.pone.0314277

BibTeX
@article{Wang2025,
  author = {Wang, Xinyan and Zhang, Lu and Li, Haizhou},
  title = {Influence of co-blending fly ash and ceramic waste powder on the performance and microstructure of cementitious substrates under sulfate dry-wet cycle attack},
  journal = {PLOS ONE},
  year = {2025},
  doi = {10.1371/journal.pone.0314277}
}
Kostenlos starten →