EUVIMEDEUVIMED entdecken
Crossref

Performance evaluation of Lead–Zinc tailings sand concrete under sulfate corrosion

Shuangyang Cai, Yu Tu, Xiaoqing Wei, Jian Lv, Guo Cao

Environmental Geochemistry and Health · 2026

DOI: 10.1007/s10653-026-03024-y ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environmental Geochemistry and Health, 2026. Verfasst von Shuangyang Cai und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Traffic and Transportation Engineering, Hunan Institute of Traffic Engineering, Hengyang, 421001, China. Hauptthemen laut MEDLINE: Construction Materials, Zinc, Lead, Sand. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: Outstanding Youth Project of the Hunan Provincial Department of Education: Research on the Impact of Erosion-High Temperature Coupling on the Performance of Le….

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the sulfate durability performance of concrete incorporating lead-zinc tailings sand (LZTS) as partial replacement for fine aggregates. Greater emphasis is placed on long-term resistance to sulfate attack rather than on strength enhancement, ensuring full consistency with the manuscript title. Sulfate exposure conducted in a 5% Na2SO4 solution for periods of up to 180 days, during which mass change, linear expansion, surface degradation, and residual mechanical strength were systematically evaluated. The results demonstrate that optimized levels of LZTS replacement, in combination with low-dosage hybrid nanomaterials, significantly enhance the sulfate resistance while maintaining satisfactory mechanical performance. From a sustainability perspective, replacement of up to 50% of natural river sand is achievable, contributing to reduced depletion of natural resources. Microstructural observations obtained from SEM, supported by XRD and FTIR analyses, provide indirect yet consistent evidence of matrix densification and suppression of sulfate reaction products. FTIR spectra confirmed these observations by intensifying Si-O-Si and Al-O-Si bands and weakening Sulfate-associated vibrations with Heavy metal immobilization efficiency exceeding 90%. The findings reveal the potential of LZTS-based concrete as a durable and environmentally responsible construction material for sulfate-rich environments.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Construction MaterialsZincLeadSandSulfatesCorrosionX-Ray DiffractionSpectroscopy, Fourier Transform Infrared

Stichwörter der Autor:innen

FTIRHeavy-metal immobilizationHybrid nanomaterialsLead–Zinc tailings sandSulfate corrosionXRD

Substanzen

ZincLeadSandSulfates

Autor:innen und Institutionen

  • School of Traffic and Transportation Engineering, Hunan Institute of Traffic Engineering, Hengyang, 421001, China.
  • State Key Laboratory of Precision Blasting, Jianghan University, Wuhan, 430056, China.
  • TBEA Yunji Electric Co., Ltd., Hengyang, 421001, China.
  • School of Traffic and Transportation Engineering, Hunan Institute of Traffic Engineering, Hengyang, 421001, China. m18821806360@163.com.

Förderung

  • Outstanding Youth Project of the Hunan Provincial Department of Education: Research on the Impact of Erosion-High Temperature Coupling on the Performance of Le…

Zitieren

APA

Cai, S., Tu, Y., Wei, X., Lv, J., & Cao, G. (2026). Performance evaluation of Lead–Zinc tailings sand concrete under sulfate corrosion. Environmental Geochemistry and Health. https://doi.org/10.1007/s10653-026-03024-y

Vancouver

Cai S, Tu Y, Wei X, Lv J, Cao G. Performance evaluation of Lead–Zinc tailings sand concrete under sulfate corrosion. Environmental Geochemistry and Health. 2026. doi:10.1007/s10653-026-03024-y

BibTeX
@article{Cai2026,
  author = {Cai, Shuangyang and Tu, Yu and Wei, Xiaoqing and Lv, Jian and Cao, Guo},
  title = {Performance evaluation of Lead–Zinc tailings sand concrete under sulfate corrosion},
  journal = {Environmental Geochemistry and Health},
  year = {2026},
  doi = {10.1007/s10653-026-03024-y}
}
Kostenlos starten →