EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Road properties of cement-phosphogypsum-red clay under dry and wet cycles

Yunke Liu, Kaisheng Chen iD, Hao Jian, Zeyu Liu

PLOS ONE · 2024

DOI: 10.1371/journal.pone.0314276 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2024. Verfasst von Yunke Liu und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Guizhou University, Guiyang, Guizhou Province, China. Hauptthemen laut MEDLINE: Construction Materials, Clay, Calcium Sulfate, Phosphorus. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guizhou Provincial Science and Technology Program, Guiyang Municipal Science and Technology Program Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, the road performance and mechanism of cement-phosphogypsum-red clay (CPRC) under dry and wet cycling were systematically investigated using 5% cement as curing agent, the mass ratio of phosphogypsum: red clay = 1:1, and 5% SCA-2 as water stabilizer. The road performance of dry and wet cycle mix was verified with the National Highway G210 Duyun Yangan to Yingshan Highway Reconstruction and Expansion Project as a test road to provide a scientific basis for the application of cement-phosphogypsum-red clay on roads. The results show that the cement-phosphogypsum-red clay unconfined compressive strength decreases with the increase of the number of wet and dry cycles, with a larger decay in the first three times and leveling off thereafter. The CBR value meets the requirements of roadbed fill on highway and Class I roads as stipulated in the Design Code for Highway Roadbeds (JTG D30-2015). SCA-2 water stabilizer reduces the strength of the mixture, but significantly improve the water stability performance of the mixture, the reason SCA-2 water stabilizer active ingredients and mixing particles of physicochemical reaction, the content of ettringite in the mixture is lower than the content of the mixture not mixed with water stabilizers, the generation of quartz, white mica, and kaolinite and other hydrophilic poor material increases, the surface of the cementitious material increases, the seepage channel is reduced, so the strength is reduced, and water stability performance is improved. The roadbed of the test road was smooth and dense, with no scouring, peeling or cracking. The settlement of the roadbed is less than the requirement of “Highway Roadbed Design Specification” (JTGD30-2015). Cement-phosphogypsum-red clay (cement 5%, phosphogypsum 47.5%, red clay 47.5%, SCA-2 water stabilizer 5%) can be used as filler for road bed on highway and primary road base.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Construction MaterialsClayCalcium SulfatePhosphorusWaterAluminum SilicatesCompressive Strength

Substanzen

ClayCalcium SulfatePhosphorusphosphogypsumWaterAluminum Silicates

Autor:innen und Institutionen

  • School of Civil Engineering, Guizhou University, Guiyang, Guizhou Province, China.

ORCID-Profile: Kaisheng Chen

Förderung

  • Guizhou Provincial Science and Technology Program
  • Guiyang Municipal Science and Technology Program Project

Zitieren

APA

Liu, Y., Chen, K., Jian, H., & Liu, Z. (2024). Road properties of cement-phosphogypsum-red clay under dry and wet cycles. PLOS ONE. https://doi.org/10.1371/journal.pone.0314276

Vancouver

Liu Y, Chen K, Jian H, Liu Z. Road properties of cement-phosphogypsum-red clay under dry and wet cycles. PLOS ONE. 2024. doi:10.1371/journal.pone.0314276

BibTeX
@article{Liu2024,
  author = {Liu, Yunke and Chen, Kaisheng and Jian, Hao and Liu, Zeyu},
  title = {Road properties of cement-phosphogypsum-red clay under dry and wet cycles},
  journal = {PLOS ONE},
  year = {2024},
  doi = {10.1371/journal.pone.0314276}
}
Kostenlos starten →