EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparing controlled low strength materials with cement-treated construction waste clay improved by sodium hexametaphosphate

Chenhao Li, Tinglong Xie, Jianwen Ding iD, Jian Tang, Mengying Gao

PLOS ONE · 2025

DOI: 10.1371/journal.pone.0314077 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2025. Verfasst von Chenhao Li und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Geotechnical Engineering, School of Transportation, Southeast University, Nanjing, China. Hauptthemen laut MEDLINE: Construction Materials, Clay, Phosphates, Aluminum Silicates. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To solve the disposal of large quantities of construction waste clay, this study proposes a new method for preparing controlled low strength materials (CLSM). Flow tests, unconfined compressive strength (UCS) tests, hydraulic conductivity tests and scanning electron microscope (SEM) analyses were performed on cement-treated construction waste clay with different additive content (e.g. sodium hexametaphosphate (SHMP), water glass, and phosphogypsum (PG)). The influence of additive content on the mechanical and microstructural properties of cement-treated clay-based CLSM was analyzed. The results indicated that the SHMP greatly enhanced the flowability of samples, adding 1%SHMP increased the fluidity of the sample by more than 80%, whereas 5% water glass had negligible effect. Additionally, the 10% PG improved the flowability retention, making it have higher flowability after 30 mins (more than 200 mm). SHMP interacted with Ca 2+ , significantly influencing the cement hydration; notably, 1% content resulted a notable reduction of samples from 167.5 kPa to 21.5 kPa at 1 day. Although increasing SHMP content improved the early strength, it led to a decrease in later strength, with the maximum late strength observed at 2% SHMP. Both PG and water glass also contributed to late strength enhancement, though higher SHMP levels diminished their effects. While SHMP markedly improved permeability resistance (less than 8 × 10 −8 cm/s after 28d), hydraulic conductivity showed minimal variation with increased dosage. The combination of SHMP, PG and water glass effectively enhances the flowability and strength of clay-based CLSM at low water content, solving the contradiction between fluidity and strength. This promotes the sustainable development of green building materials.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Construction MaterialsClayPhosphatesAluminum SilicatesCompressive StrengthMaterials TestingCalcium SulfatePhosphorus

Substanzen

ClayPhosphatesAluminum SilicatesphosphogypsumCalcium SulfatePhosphorus

Autor:innen und Institutionen

  • Institute of Geotechnical Engineering, School of Transportation, Southeast University, Nanjing, China.
  • Jiangsu Provincial Construction Group Co., Ltd., Nanjing, China.

ORCID-Profile: Jianwen Ding

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, C., Xie, T., Ding, J., Tang, J., & Gao, M. (2025). Preparing controlled low strength materials with cement-treated construction waste clay improved by sodium hexametaphosphate. PLOS ONE. https://doi.org/10.1371/journal.pone.0314077

Vancouver

Li C, Xie T, Ding J, Tang J, Gao M. Preparing controlled low strength materials with cement-treated construction waste clay improved by sodium hexametaphosphate. PLOS ONE. 2025. doi:10.1371/journal.pone.0314077

BibTeX
@article{Li2025,
  author = {Li, Chenhao and Xie, Tinglong and Ding, Jianwen and Tang, Jian and Gao, Mengying},
  title = {Preparing controlled low strength materials with cement-treated construction waste clay improved by sodium hexametaphosphate},
  journal = {PLOS ONE},
  year = {2025},
  doi = {10.1371/journal.pone.0314077}
}
Kostenlos starten →