EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

What should I use to calculate vehicle EES?

Pavlína Moravcová iD, Kateřina Bucsuházy, Robert Zůvala iD, Marek Semela, Albert Bradáč

PLOS ONE · 2024

DOI: 10.1371/journal.pone.0297940 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2024. Verfasst von Pavlína Moravcová und 4 weiteren Autor:innen. Beteiligte Einrichtung: Transport Research Centre, Brno, Czech Republic. Hauptthemen laut MEDLINE: Accidents, Traffic, Algorithms. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerstvo Dopravy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Comprehensive crash analysis includes calculating impact speed, which requires the determination of kinetic energy expended on the deformation of the vehicle’s structural elements at the point of contact during a collision. The accuracy of the input data affects the resulting analysis of the crash. Therefore, this article aims to analyse selected factors influencing the determination of Energy Equivalent Speed (EES) determination using the CRASH3 algorithm: the extent of damage using defined measurement points, deformation width, and also limit speed b 0 . The variables were varied depending on selected factors such as the extent of damage, the type of collision (overlap), and also vehicle type (vehicle category classification). The presented study concluded that using 2 equally spaced measurement points to define the deformation profile should not be recommended in forensic practice when using CRASH3 algorithm. Using 7 measurement points seems more appropriate in case of equal spacing, even though the differences in calculated EES are not high when using 5 or 6 measurement points, especially with respect to the inaccuracy/technically acceptable tolerance of the EES value determination. The resulting EES is significantly influenced by variation of the deformation width. The used b 0 range had a significant effect on the resulting EES value only in the case of SUVs. These vehicles show higher stiffness, which supposes the use of lower b 0 values should not be recommended.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Accidents, TrafficAlgorithmsPhysical Phenomena

Autor:innen und Institutionen

  • Transport Research Centre, Brno, Czech Republic.
  • Institute of Forensic Engineering, Brno University of Technology, Brno, Czech Republic.

ORCID-Profile: Pavlína Moravcová, Robert Zůvala

Förderung

  • Ministerstvo Dopravy

Zitieren

APA

Moravcová, P., Bucsuházy, K., Zůvala, R., Semela, M., & Bradáč, A. (2024). What should I use to calculate vehicle EES?. PLOS ONE. https://doi.org/10.1371/journal.pone.0297940

Vancouver

Moravcová P, Bucsuházy K, Zůvala R, Semela M, Bradáč A. What should I use to calculate vehicle EES?. PLOS ONE. 2024. doi:10.1371/journal.pone.0297940

BibTeX
@article{Moravcov2024,
  author = {Moravcová, Pavlína and Bucsuházy, Kateřina and Zůvala, Robert and Semela, Marek and Bradáč, Albert},
  title = {What should I use to calculate vehicle EES?},
  journal = {PLOS ONE},
  year = {2024},
  doi = {10.1371/journal.pone.0297940}
}
Kostenlos starten →