EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of different grinding degrees of fly ash on properties and reaction degrees of geopolymers

Qingwei Sun, Siyuan Zhao iD, Xuzhe Zhao, Yu Song, Xinyu Ban, Ni Zhang

PLOS ONE · 2023

DOI: 10.1371/journal.pone.0282927 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2023. Verfasst von Qingwei Sun und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Civil Engineering, Liaoning Technical University, Fuxin, China. Hauptthemen laut MEDLINE: Coal Ash, Mercury. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Research Project of Education Department of Liaoning Province, Liaoning province Natural Science Foundation General Project, Project supported by discipline innovation team of Liaoning Technical Universit.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study reports the preparation of geopolymers with a mechanical performance similar to that of cement at room temperature by ground fly ash mixed with a small amount of cement. The grinding time of fly ash raw materials was 0,20,40 and 60 min, respectively. The influence of the grinding degree of the fly ash on the properties and the reaction degree of the geopolymer were investigated by XRD, SEM, EDS, and mercury compression tests. The reaction degree of the fly ash geopolymer was quantified by the selective dissolution method. Increasing the grinding degree of fly ash significantly increased the compressive strength of the geopolymer and the density of the microstructure of materials also increased. Furthermore, porosity and the average pore size decreased and the proportion of small holes in the pores gradually increased. The calculation results were in coincidence with the compressive strength test and the micro-performance test of the material, thus indicating that the selective dissolution method can reflect the influence of the grinding degree on the reaction degree of the geopolymer. Furthermore, the reaction degree of the geopolymer increased as the grinding degree of the fly ash increased. However, the growth rate of the reaction degree for the geopolymer slowed down when the fly ash was ground for more than 40 min.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Coal AshMercuryPolymersCompressive StrengthPorosity

Substanzen

Coal AshPolymersMercury

Autor:innen und Institutionen

  • College of Civil Engineering, Liaoning Technical University, Fuxin, China.
  • College of Civil Engineering, Guangxi Key Laboratory of Mechanics and Geotechnical Engineering, Guilin University of Technology, Guilin, China.

ORCID-Profile: Siyuan Zhao

Förderung

  • Science and Technology Research Project of Education Department of Liaoning Province
  • Liaoning province Natural Science Foundation General Project
  • Project supported by discipline innovation team of Liaoning Technical Universit

Zitieren

APA

Sun, Q., Zhao, S., Zhao, X., Song, Y., Ban, X., & Zhang, N. (2023). Influence of different grinding degrees of fly ash on properties and reaction degrees of geopolymers. PLOS ONE. https://doi.org/10.1371/journal.pone.0282927

Vancouver

Sun Q, Zhao S, Zhao X, Song Y, Ban X, Zhang N. Influence of different grinding degrees of fly ash on properties and reaction degrees of geopolymers. PLOS ONE. 2023. doi:10.1371/journal.pone.0282927

BibTeX
@article{Sun2023,
  author = {Sun, Qingwei and Zhao, Siyuan and Zhao, Xuzhe and Song, Yu and Ban, Xinyu and Zhang, Ni},
  title = {Influence of different grinding degrees of fly ash on properties and reaction degrees of geopolymers},
  journal = {PLOS ONE},
  year = {2023},
  doi = {10.1371/journal.pone.0282927}
}
Kostenlos starten →