EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Stereolithography 3D printing of a cyclic olefin resin for terahertz quasi-optical applications

Luke Phillips, Sanchit Kondawar, Harry J. Godden, Ben Douglas, Nathan R. Fox, Mohammed Salih, Alexander Valavanis, Andrew D. Burnett, Robert Kay, Raymond A. Weitekamp, Ehab Saleh

Optical Materials Express · 01.06.2026 · 16 (6) · 1760

DOI: 10.1364/ome.601125 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Optical Materials Express, online erschienen am 21.05.2026. Verfasst von Luke Phillips und 10 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: UK Research and Innovation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Stereolithography (SLA) additive manufacturing (AM) is an emerging technique for fabricating terahertz (THz) complex quasi-optical components at low-cost. However, most photopolymers exhibit significant absorption losses, limiting the performance of SLA-produced quasi-optics. Cyclic Olefin Resin (COR) was identified as a promising alternative owing to its formulation of olefinic monomers highly transparent to THz radiation. SLA-fabricated COR samples were characterized from 0.5 to 6 THz using time-domain spectroscopy. Gyroid lattices were printed to assess the feasibility of sub-wavelength features at 1 THz. Additionally, plano-convex and Fresnel lenses were manufactured and evaluated using a THz quantum cascade laser (QCL) system. COR exhibited an absorption coefficient of (3.96 ± 0.01) cm –1 at 1 THz, increasing to (11.29 ± 0.39) cm –1 at 6 THz, substantially lower than conventional photopolymers, which exceed 60 cm –1 at 2 THz. Gyroid lattices demonstrated reproducible features, while the lenses operated efficiently at 3.4 THz. COR was shown to be considerably more transparent to THz radiation than standard photopolymers, enabling the fabrication of efficient quasi-optics using low-cost SLA systems, improving accessibility of bespoke THz optical components.

Förderung

  • UK Research and Innovation

Zitieren

APA

Phillips, L., Kondawar, S., Godden, H. J., Douglas, B., Fox, N. R., Salih, M., Valavanis, A., Burnett, A. D., Kay, R., Weitekamp, R. A., & Saleh, E. (2026). Stereolithography 3D printing of a cyclic olefin resin for terahertz quasi-optical applications. Optical Materials Express, 16(6), 1760. https://doi.org/10.1364/ome.601125

Vancouver

Phillips L, Kondawar S, Godden HJ, Douglas B, Fox NR, Salih M, et al. Stereolithography 3D printing of a cyclic olefin resin for terahertz quasi-optical applications. Optical Materials Express. 2026;16(6):1760. doi:10.1364/ome.601125

BibTeX
@article{Phillips2026,
  author = {Phillips, Luke and Kondawar, Sanchit and Godden, Harry J. and Douglas, Ben and Fox, Nathan R. and Salih, Mohammed and Valavanis, Alexander and Burnett, Andrew D. and Kay, Robert and Weitekamp, Raymond A. and Saleh, Ehab},
  title = {Stereolithography 3D printing of a cyclic olefin resin for terahertz quasi-optical applications},
  journal = {Optical Materials Express},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {1760},
  doi = {10.1364/ome.601125}
}
Kostenlos starten →