Femtosecond laser printing-assisted etching tailored hard and brittle micro-convex surface
Optics Letters · 01.10.2023 · 48 (19) · 5097
DOI: 10.1364/ol.501146 ↗Kurz gefasst
Fachartikel in der Zeitschrift Optics Letters, online erschienen am 26.09.2023. Verfasst von Yang Liu und 8 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 22 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Fundamental Research Funds for Central Public Welfare Scientific Research Institutes sponsored by National Institute of Metrology, Major Basic Research Project of the Natural Science Foundation of the Jiangsu Higher Education Institutions.
Abstract (Originalsprache)
We report a femtosecond laser print-assisted dry etching technology for high-efficiency, high-quality, and tailored fabricating of a micro-convex surface (MCS) on hard and brittle materials. Liquid ultraviolet curing adhesive (UVCA) was transferred from a donor substrate to a receiving substrate by femtosecond laser-induced forward transfer, and the transferred microdroplet spontaneously has a smooth surface under the action of surface tension. And then an MCS with a high-quality surface was formed on hard and brittle materials by UV curing and dry etching. The effects of laser parameters and receiving substrate surface free energy on MCS morphology were investigated. According to the variation of the numerical aperture, the two methods to change the morphology of the MCS were divided into independent/joint regulation of diameter and height. We showed that a hexagonal array containing a variety of MCS morphologies can be fabricated on a fused silica by setting the appropriate parameters. And the fabrication time of an MCS in a large-area array was only 1.1 s.
Förderung
- National Key Research and Development Program of China
- Fundamental Research Funds for Central Public Welfare Scientific Research Institutes sponsored by National Institute of Metrology
- Major Basic Research Project of the Natural Science Foundation of the Jiangsu Higher Education Institutions
- China Postdoctoral Science Foundation
- 2023 Science and Technology Innovation Fund Project in Zhenjiang City
- Research Project of Processing Technology of Quartz Material
Zitieren
APA
Liu, Y., Huang, J., Yin, B., Ye, Y., Liang, M., Chen, X., Wang, F., Zhang, J., & Dai, Z. (2023). Femtosecond laser printing-assisted etching tailored hard and brittle micro-convex surface. Optics Letters, 48(19), 5097. https://doi.org/10.1364/ol.501146
Vancouver
Liu Y, Huang J, Yin B, Ye Y, Liang M, Chen X, et al. Femtosecond laser printing-assisted etching tailored hard and brittle micro-convex surface. Optics Letters. 2023;48(19):5097. doi:10.1364/ol.501146
BibTeX
@article{Liu2023,
author = {Liu, Yang and Huang, Ji and Yin, Bin and Ye, Yunxia and Liang, Misheng and Chen, Xiaozhe and Wang, Feifei and Zhang, Jingjing and Dai, Zijie},
title = {Femtosecond laser printing-assisted etching tailored hard and brittle micro-convex surface},
journal = {Optics Letters},
year = {2023},
volume = {48},
number = {19},
pages = {5097},
doi = {10.1364/ol.501146}
}
EUVIMED