All-fiber microheater with attenuation-controlled hot-zone based on metal-doped silica fibers
Optics Express · 27.07.2026 · 34 (15) · 28164
DOI: 10.1364/oe.605266 ↗Kurz gefasst
Fachartikel in der Zeitschrift Optics Express, online erschienen am 21.07.2026. Verfasst von Youngmin Ko und 2 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Gefördert von: Korea Institute for Advancement of Technology, Electronics and Telecommunications Research Institute.
Abstract (Originalsprache)
We propose and experimentally demonstrate an optical microheater based on metal-doped optical fibers (MDFs) that exploits the intrinsic 1480 nm absorption of Co 2+ and Fe 2+ /Fe 3+ ions co-doped in an aluminosilicate core. Three MDFs with attenuation coefficients of 9.45, 12.58, and 32.43 dB/cm are fusion-spliced to single-mode fibers to form 10-mm-long heaters. Under 367 mW pumping, the peak surface temperatures reach 166, 268, and 478 °C, while the corresponding hot-zone lengths (FWHM) decrease from 10.6 to 2.8 mm, demonstrating that the attenuation coefficient is a single design parameter that simultaneously controls both temperature and spatial confinement. A Beer–Lambert distributed heat source coupled with a cylindrical fin model predicts the peak temperatures of the remaining samples within 5–21% from a single calibration point. Independent fiber Bragg grating measurements verify the thermographic results within 18 °C, and optically induced carbonization of an acrylate recoating confirms the practical heating capability. Unlike conventional coating-based fiber microheaters, the proposed device requires no external photothermal layer, is directly fusion-spliceable to standard SMFs, and enables attenuation-controlled tailoring of both the peak temperature and hot-zone length.
Förderung
- Korea Institute for Advancement of Technology
- Electronics and Telecommunications Research Institute
Zitieren
APA
Ko, Y., Kim, Y., & Ahn, T. J. (2026). All-fiber microheater with attenuation-controlled hot-zone based on metal-doped silica fibers. Optics Express, 34(15), 28164. https://doi.org/10.1364/oe.605266
Vancouver
Ko Y, Kim Y, Ahn TJ. All-fiber microheater with attenuation-controlled hot-zone based on metal-doped silica fibers. Optics Express. 2026;34(15):28164. doi:10.1364/oe.605266
BibTeX
@article{Ko2026,
author = {Ko, Youngmin and Kim, Yeongwan and Ahn, Tae-Jung},
title = {All-fiber microheater with attenuation-controlled hot-zone based on metal-doped silica fibers},
journal = {Optics Express},
year = {2026},
volume = {34},
number = {15},
pages = {28164},
doi = {10.1364/oe.605266}
}
EUVIMED