EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Radiation effects on pure silica and Ge-doped silica core optical fibers and fiber Bragg grating sensors

Wen Hu, Chongyun Shao, Chunlei Yu, Lu Deng, Yuzhou Ming, Qing Ye, Xin Li, Yinpeng Liu, Mengda Wei, Dongyu He, Lili Hu, Si-Yu Li und 2 weitere

Journal of Applied Physics · 14.01.2025 · 137 (2)

DOI: 10.1063/5.0244240 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 10.01.2025. Verfasst von Wen Hu und 13 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Chinese Academy of Sciences, China National Nuclear Corporation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fiber Bragg gratings (FBGs) are widely used in high-radiation environments owing to their high sensitivity, stability, and resistance to electromagnetic interference. In this study, pure and Ge-doped silica core fibers were fabricated using chemical vapor deposition. Based on these fibers, two temperature sensors, FBG-Si and FBG-Ge, were developed using femtosecond laser direct writing combined with metalized armoring. The fibers and sensors were exposed to gamma radiation, and their stability, temperature accuracy, and refractive index were systematically evaluated. Electron paramagnetic resonance and radiation-induced loss were used to investigate the effects of gamma radiation on the fiber materials and temperature sensors at the atomic micro-scale. The results showed that the Bragg center wavelength (λB) of the FBGs linearly redshifted with increasing temperature under non-stressed conditions. After gamma irradiation, at a temperature, λB, redshifted further with increasing radiation dose. The FBG-Si sensor exhibited higher stability and smaller temperature errors than FBG-Ge. Both sensors exhibited a decrease in output power after irradiation. The performance degradation of the FBGs after irradiation is attributed to an increase in the number of color centers and defects within the grating, leading to higher transmission losses. As the radiation dose increased, the concentration of the color centers increased, leading to changes in the refractive index of the gratings. This ultimately resulted in a redshift in λB and caused temperature measurement errors.

Förderung

  • University of Chinese Academy of Sciences
  • China National Nuclear Corporation

Zitieren

APA

Hu, W., Shao, C., Yu, C., Deng, L., Ming, Y., Ye, Q., Li, X., Liu, Y., Wei, M., He, D., Hu, L., Li, S., Pan, A., & Liao, M. (2025). Radiation effects on pure silica and Ge-doped silica core optical fibers and fiber Bragg grating sensors. Journal of Applied Physics, 137(2). https://doi.org/10.1063/5.0244240

Vancouver

Hu W, Shao C, Yu C, Deng L, Ming Y, Ye Q, et al. Radiation effects on pure silica and Ge-doped silica core optical fibers and fiber Bragg grating sensors. Journal of Applied Physics. 2025;137(2). doi:10.1063/5.0244240

BibTeX
@article{Hu2025,
  author = {Hu, Wen and Shao, Chongyun and Yu, Chunlei and Deng, Lu and Ming, Yuzhou and Ye, Qing and Li, Xin and Liu, Yinpeng and Wei, Mengda and He, Dongyu and Hu, Lili and Li, Si-Yu and Pan, Anlian and Liao, Meisong},
  title = {Radiation effects on pure silica and Ge-doped silica core optical fibers and fiber Bragg grating sensors},
  journal = {Journal of Applied Physics},
  year = {2025},
  volume = {137},
  number = {2},
  doi = {10.1063/5.0244240}
}
Kostenlos starten →