EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser-based manufacturing of fused silica optics: figure error correction using laser beam figuring

Emrah Uluz, Shengyi Dai, Edgar Willenborg, Constantin Haefner

Optics Express · 20.04.2026 · 34 (8) · 15713

DOI: 10.1364/oe.591743 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Optics Express, online erschienen am 17.04.2026. Verfasst von Emrah Uluz und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Federal Ministry for Economic Affairs and Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Demand for complex, application-specific optics requires processes that deliver high surface quality and figure accuracy at reduced cost and lead time. This work investigates laser beam figuring (LBF) as a deterministic, laser-based step in an integrated manufacturing chain for fused silica optics. LBF uses spatially selective CO 2 -laser irradiation to remove material in the nanometer range according to the difference between the actual and target surface geometry. Pulse-duration modulation enables precise depth control while maintaining low surface roughness. Building on previous studies, we address two critical gaps in the state-of-the-art. First, we experimentally determine the long-term stability of laser-induced densified regions over an unprecedented 80-week observation period, demonstrating statistically robust process stability essential for industrial applications. Second, we systematically map the transition from densification-dominated regimes (< 10 nm) to true ablation, identifying optimal process windows (dx = 10 μm, dy = 30 μm) that enable reproducible nanometer-scale figure correction with area rates competitive to conventional methods. Figure error correction experiments demonstrate RMS reduction from 79.2 nm to 30.6 nm in a single pass. However, LBF introduces high-frequency surface features (λ < 100 μm), suggesting integration with chemo-mechanical post-polishing for applications requiring ultra-smooth surfaces. The results provide a quantitative foundation for LBF as a complementary technology to ion beam figuring and magnetorheological finishing, particularly suited for rapid prototyping and laser-based process chains.

Förderung

  • German Federal Ministry for Economic Affairs and Energy

Zitieren

APA

Uluz, E., Dai, S., Willenborg, E., & Haefner, C. (2026). Laser-based manufacturing of fused silica optics: figure error correction using laser beam figuring. Optics Express, 34(8), 15713. https://doi.org/10.1364/oe.591743

Vancouver

Uluz E, Dai S, Willenborg E, Haefner C. Laser-based manufacturing of fused silica optics: figure error correction using laser beam figuring. Optics Express. 2026;34(8):15713. doi:10.1364/oe.591743

BibTeX
@article{Uluz2026,
  author = {Uluz, Emrah and Dai, Shengyi and Willenborg, Edgar and Haefner, Constantin},
  title = {Laser-based manufacturing of fused silica optics: figure error correction using laser beam figuring},
  journal = {Optics Express},
  year = {2026},
  volume = {34},
  number = {8},
  pages = {15713},
  doi = {10.1364/oe.591743}
}
Kostenlos starten →