Near-zero residual stress in TiO 2 /SiO 2 multilayer optical coatings via independent IBAD process optimization
Applied Optics · 01.08.2026 · 65 (22) · 7424
DOI: 10.1364/ao.604056 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Optics, online erschienen am 23.07.2026. Verfasst von Bo Wang und 4 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben. Gefördert von: Chinese Academy of Sciences.
Abstract (Originalsprache)
Precision optical thin films are core enabling components for state-of-the-art systems including high-end photolithography and space-based optical payloads, whose optical stability and mechanical reliability directly define the performance limit of the entire system. Ion beam-assisted deposition (IBAD) is the prevailing fabrication technique for high-precision coatings, but residual stress, especially intrinsic stress accumulation in multilayers and stress mismatch under environmental variations, remains a long-standing critical bottleneck, as it frequently causes film cracking, spectral deviation, and even catastrophic failure. Herein, we systematically characterize the individual dependencies of residual stress on two key IBAD process parameters: deposition rate for high-refractive-index titanium dioxide (TiO 2 ) single-layer films and assisting ion source energy for low-refractive-index silicon dioxide (SiO 2 ) single-layer films. Leveraging these calibration results, we develop a facile yet robust near-zero-stress regulation strategy via independent process optimization of each constituent material. For TiO 2 films, the stress state undergoes a continuous transition from compressive to tensile with increasing deposition rate, achieving a near-zero-stress state at a critical rate of 1.5 Å/s. For SiO 2 films, the compressive stress is linearly tunable via assisting ion source energy, enabling accurate identification of a well-defined near-zero-stress process window at 60 V. TiO 2 /SiO 2 multilayer coatings fabricated using the optimized parameters exhibit ultra-low overall residual stress [0.19 MPa for 1064 nm high-reflection (HR) coatings and 0.32 MPa for 850/1550 nm anti-reflection (AR) coatings], with measured spectral characteristics in excellent agreement with the theoretical designs, and retain an interferogram of wavefront accuracy better than λ /80 RMS. This strategy mitigates intrinsic stress accumulation at the deposition source, breaks the inherent trade-off between optical design and stress control for the TiO 2 /SiO 2 material system, and provides actionable technical guidance for the fabrication of high-precision optical thin films for photolithography and aerospace optical systems.
Förderung
- Chinese Academy of Sciences
Zitieren
APA
Wang, B., Wu, T., Hu, G., Gao, W., & Wang, C. (2026). Near-zero residual stress in TiO 2 /SiO 2 multilayer optical coatings via independent IBAD process optimization. Applied Optics, 65(22), 7424. https://doi.org/10.1364/ao.604056
Vancouver
Wang B, Wu T, Hu G, Gao W, Wang C. Near-zero residual stress in TiO 2 /SiO 2 multilayer optical coatings via independent IBAD process optimization. Applied Optics. 2026;65(22):7424. doi:10.1364/ao.604056
BibTeX
@article{Wang2026,
author = {Wang, Bo and Wu, Taiqi and Hu, Gang and Gao, Weidong and Wang, Changjun},
title = {Near-zero residual stress in TiO 2 /SiO 2 multilayer optical coatings via independent IBAD process optimization},
journal = {Applied Optics},
year = {2026},
volume = {65},
number = {22},
pages = {7424},
doi = {10.1364/ao.604056}
}
EUVIMED