EUVIMEDEUVIMED entdecken
Crossref

Mechanical and Tribological Characterization, Multi-Objective Optimization, and Lightweight Structural Applications of Fused Filament Fabricated Carbon Fiber-Reinforced Nylon Composites

S. Mayakannan, P. Satishkumar, B. Sriharini, P. Meruna

Journal of Composite Engineering and Materials Technology · 30.06.2026 · 1 (2) · 1-10

DOI: 10.13074/jcemt.2026.06.262006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composite Engineering and Materials Technology, online erschienen am 30.06.2026. Verfasst von S. Mayakannan und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon fiber-reinforced nylon (CF-Nylon) composites have become promising engineering materials for use in lightweight structural applications due to their superior strength-to-weight ratio and excellent durability. The mechanical behaviour and multi-response optimized fused filament fabricated (FFF) CF-Nylon components were systematically studied. Specimens were fabricated by changing three processing parameters: layer height, infill density, and build orientation, by varying the parameters within a Delta WASP 2040 Industrial X FFF system. The fabricated samples were then tested for tensile, compression, Izod impact and wear properties to understand the effect of printing parameters on structural and tribological properties. In comparison with the other experimental trials, the maximum tensile strength (48.1 MPa), compressive strength (56.8 MPa), and impact strength (35.4 J/m) were achieved while the minimum wear rate (0.0184 mm3/m) was obtained at a layer height of 0.35 mm, infill density of 90%, and orientation of 1. The collected data were then used in the creation of a prediction model using the Artificial Neural Network (ANN) for accurate correlation between the processing parameters and mechanical responses. Additionally, a Multi-Objective Genetic Algorithm (MOGA) was combined with the ANN model to find the optimal processing window, taking into account the maximization of tensile strength, compressive strength, and impact strength as well as minimizing wear. The optimum parameter combination given by the hybrid ANN–MOGA optimization was 0.35 mm layer height, 74.22% infill density, and orientation of 3 with tensile strength of 49.59 MPa, impact strength of 39.21 J/m, compressive strength of 57.71 MPa, and wear rate of 0.0346 mm3/m. The results show that artificial intelligence coupled with evolutionary optimization is an effective approach to enhance mechanical performance and process optimization of FFF-manufactured CF–Nylon composites.

Zitieren

APA

Mayakannan, S., Satishkumar, P., Sriharini, B., & Meruna, P. (2026). Mechanical and Tribological Characterization, Multi-Objective Optimization, and Lightweight Structural Applications of Fused Filament Fabricated Carbon Fiber-Reinforced Nylon Composites. Journal of Composite Engineering and Materials Technology, 1(2), 1-10. https://doi.org/10.13074/jcemt.2026.06.262006

Vancouver

Mayakannan S, Satishkumar P, Sriharini B, Meruna P. Mechanical and Tribological Characterization, Multi-Objective Optimization, and Lightweight Structural Applications of Fused Filament Fabricated Carbon Fiber-Reinforced Nylon Composites. Journal of Composite Engineering and Materials Technology. 2026;1(2):1-10. doi:10.13074/jcemt.2026.06.262006

BibTeX
@article{Mayakannan2026,
  author = {Mayakannan, S. and Satishkumar, P. and Sriharini, B. and Meruna, P.},
  title = {Mechanical and Tribological Characterization, Multi-Objective Optimization, and Lightweight Structural Applications of Fused Filament Fabricated Carbon Fiber-Reinforced Nylon Composites},
  journal = {Journal of Composite Engineering and Materials Technology},
  year = {2026},
  volume = {1},
  number = {2},
  pages = {1--10},
  doi = {10.13074/jcemt.2026.06.262006}
}
Kostenlos starten →