EUVIMEDEUVIMED entdecken
Crossref

Optimization of Surface Roughness and Tool Wear during Machining of AMMC using Taguchi Technique

Srinivasan Surendran, Thirumurugaveerakumar Sundaram, Sathish Kumar P

Chiang Mai Journal of Science · 30.11.2022 · 49 (6)

DOI: 10.12982/cmjs.2022.095 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chiang Mai Journal of Science, online erschienen am 30.11.2022. Verfasst von Srinivasan Surendran und 2 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal matrix composite materials are used in several industrial applications due to its improved specifi c strength, capacity, good wear resistance, and high specifi c modulus and so on. In this work, the Aluminium alloy Al6061 is used as the matrix and 15% of volume fraction of silicon carbide is used as the reinforcing element to fabricate a MMC by stir casting process. The turning process parameters of Aluminium metal matrix composite (AMMC) considered in this work are cutting speed, feed, nozzle diameter and steam pressure and the responses surface roughness and tool wear. Taguchi technique is used in this research work to obtain optimum results and the S/N ratio is used as the quality characteristics and in this work L32 orthogonal array is used to conduct 32 experiments. It is observed that surface roughness of the AMMC is highly infl uenced by the nozzle diameter and it contributes to 19.87% and Tool wear of the AMMC is highly infl uenced by the steam pressure and it contributes to 7.12%.

Zitieren

APA

Surendran, S., Sundaram, T., & P, S. K. (2022). Optimization of Surface Roughness and Tool Wear during Machining of AMMC using Taguchi Technique. Chiang Mai Journal of Science, 49(6). https://doi.org/10.12982/cmjs.2022.095

Vancouver

Surendran S, Sundaram T, P SK. Optimization of Surface Roughness and Tool Wear during Machining of AMMC using Taguchi Technique. Chiang Mai Journal of Science. 2022;49(6). doi:10.12982/cmjs.2022.095

BibTeX
@article{Surendran2022,
  author = {Surendran, Srinivasan and Sundaram, Thirumurugaveerakumar and P, Sathish Kumar},
  title = {Optimization of Surface Roughness and Tool Wear during Machining of AMMC using Taguchi Technique},
  journal = {Chiang Mai Journal of Science},
  year = {2022},
  volume = {49},
  number = {6},
  doi = {10.12982/cmjs.2022.095}
}
Kostenlos starten →