EUVIMEDEUVIMED entdecken
Crossref

Limit Load Solution for Thin-Walled Cylinder with Circumferential Crack under Combined Internal Pressure, Axial Force, Bending Moment and Torsion Moment

Sutham Arun, Wichaphon Fakkaew, Thongchai Fongsamootr

Chiang Mai Journal of Science · 2022

DOI: 10.12982/cmjs.2022.005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chiang Mai Journal of Science, 2022. Verfasst von Sutham Arun und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

T his research aims to establish the limit load solution for thin-walled cylinder with circumferential crack under combined internal pressure, axial force, bending moment and torsion moment. The solution is derived based on the net-section collapse principle and the von Mises yield criterion. The material considered in this work is assumed to be elastic-perfectly plastic. The solutions obtained from this work are compared with the results from the finite element models. The comparison shows that the equations established from NSC analysis provide acceptable results for the case of cracked cylinder under combined axial force and bending moment. For the case of cylinder subjected to internal pressure or torsional moment, however, these equations can be used to predict the limit load only if np ≤ 0.40 and nT ≤ 0.6 . This is because when the effects of internal pressure or torsional moment are included, the distribution of stresses on the crack plane at the yielding does not correspond to the NSC principal.

Zitieren

APA

Arun, S., Fakkaew, W., & Fongsamootr, T. (2022). Limit Load Solution for Thin-Walled Cylinder with Circumferential Crack under Combined Internal Pressure, Axial Force, Bending Moment and Torsion Moment. Chiang Mai Journal of Science. https://doi.org/10.12982/cmjs.2022.005

Vancouver

Arun S, Fakkaew W, Fongsamootr T. Limit Load Solution for Thin-Walled Cylinder with Circumferential Crack under Combined Internal Pressure, Axial Force, Bending Moment and Torsion Moment. Chiang Mai Journal of Science. 2022. doi:10.12982/cmjs.2022.005

BibTeX
@article{Arun2022,
  author = {Arun, Sutham and Fakkaew, Wichaphon and Fongsamootr, Thongchai},
  title = {Limit Load Solution for Thin-Walled Cylinder with Circumferential Crack under Combined Internal Pressure, Axial Force, Bending Moment and Torsion Moment},
  journal = {Chiang Mai Journal of Science},
  year = {2022},
  doi = {10.12982/cmjs.2022.005}
}
Kostenlos starten →