EUVIMEDEUVIMED entdecken
Crossref

Axial Load‐Bearing Enhancement of Thin‐Walled Metal Tubes via Internal Pressurization

Dahai Zhang, Jiarong Jiang, Pengfei Yan, Fangzhou Lu, Peifei Xu, Qingguo Fei

Advanced Engineering Materials · 04.11.2026 · 28 (21)

DOI: 10.1002/adem.71202 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 21.08.2026. Verfasst von Dahai Zhang und 5 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As a lightweight load‐bearing member for aerospace truss structures, thin‐walled metal tubes require improved buckling resistance without additional mass. To this end, this paper innovatively designs a thin‐walled metal inflatable tube structure. The axial compressive behavior of the proposed tube and the influence of internal pressure are preliminarily investigated through experiments and numerical simulations. Axial compression buckling tests were conducted on two sets of specimens under 0 and 2 bar to evaluate the pressure‐induced changes in axial stiffness, critical buckling load, and buckling mode. Concurrently, a finite element model was established using material parameters obtained from independent tensile tests. The model was validated against the experimental results at 0 and 2 bar and was subsequently employed to numerically investigate the axial compressive response over a wider pressure range. In addition, initial local dimple imperfections were introduced into the finite element model to examine the imperfection sensitivity of pressurized thin‐walled tubes. Combining experimental and numerical simulation results reveals that pressurization significantly increases the buckling critical load of thin‐walled tubes and improves buckling morphology, thereby suppressing the occurrence of abnormal deformation. The numerical results also indicate that internal pressure can reduce the sensitivity of thin‐walled tubes to local dimple imperfections.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhang, D., Jiang, J., Yan, P., Lu, F., Xu, P., & Fei, Q. (2026). Axial Load‐Bearing Enhancement of Thin‐Walled Metal Tubes via Internal Pressurization. Advanced Engineering Materials, 28(21). https://doi.org/10.1002/adem.71202

Vancouver

Zhang D, Jiang J, Yan P, Lu F, Xu P, Fei Q. Axial Load‐Bearing Enhancement of Thin‐Walled Metal Tubes via Internal Pressurization. Advanced Engineering Materials. 2026;28(21). doi:10.1002/adem.71202

BibTeX
@article{Zhang2026,
  author = {Zhang, Dahai and Jiang, Jiarong and Yan, Pengfei and Lu, Fangzhou and Xu, Peifei and Fei, Qingguo},
  title = {Axial Load‐Bearing Enhancement of Thin‐Walled Metal Tubes via Internal Pressurization},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {21},
  doi = {10.1002/adem.71202}
}
Kostenlos starten →