EUVIMEDEUVIMED entdecken
Crossref

Study on the Structure Deformation in the Process of Gas Metal Arc Welding (GMAW)

Pham Son Minh, Tran Viet Phu

American Journal of Mechanical Engineering · 15.09.2014 · 2 (4) · 120-124

DOI: 10.12691/ajme-2-4-4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift American Journal of Mechanical Engineering, erschienen am 15.09.2014. Verfasst von Pham Son Minh und 1 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper investigates the welding deformation via simulation and experiments. The structure of a combined joint geometry was modeled and simulated using Simufact welding software based on the thermo elastic–plastic approach. To verify the simulation results, a series of experiments was conducted with three different welding sequences using automated welding process, low carbon steel AISI 1005 as the parent metal, and digital gas metal arc welding (GMAW) power source with premixed shielding gas and the one-sided clamping technique. Based on the results, it was established that the thermo elastic–plastic 3D FEM analysis shows good agreement with experimental results, and the welding sequence “from inside to outside” induced less distortion compared with “from outside to inside”. By claiming one plate, the deformation almost locates at the free plate.

Zitieren

APA

Minh, P. S., & Phu, T. V. (2014). Study on the Structure Deformation in the Process of Gas Metal Arc Welding (GMAW). American Journal of Mechanical Engineering, 2(4), 120-124. https://doi.org/10.12691/ajme-2-4-4

Vancouver

Minh PS, Phu TV. Study on the Structure Deformation in the Process of Gas Metal Arc Welding (GMAW). American Journal of Mechanical Engineering. 2014;2(4):120-124. doi:10.12691/ajme-2-4-4

BibTeX
@article{Minh2014,
  author = {Minh, Pham Son and Phu, Tran Viet},
  title = {Study on the Structure Deformation in the Process of Gas Metal Arc Welding (GMAW)},
  journal = {American Journal of Mechanical Engineering},
  year = {2014},
  volume = {2},
  number = {4},
  pages = {120--124},
  doi = {10.12691/ajme-2-4-4}
}
Kostenlos starten →