EUVIMEDEUVIMED entdecken
Crossref

A statistical investigation on angular distortion in gas metal arc welding process

H.R. Ghazvinloo

Journal of Achievements in Materials and Manufacturing Engineering · 01.01.2026

DOI: 10.5604/01.3001.0055.7854 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Achievements in Materials and Manufacturing Engineering, erschienen am 01.01.2026. Verfasst von H.R. Ghazvinloo. Die Arbeit nennt 17 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper aims to study and statistically analyse the influence of the GMAW process parameters (arc voltage, welding current, and welding speed) on the angular distortion in the DIN 17100 St37 steel plates and profiles.



In the study, the design of experiments (DOE) method was implemented using the Taguchi L9 orthogonal array. Arc voltage, welding current, and welding speed were selected as control factors, and angular distortion was selected as the response. The 2 set-nine experiments were designed for plate and profile joints, and the angular distortion was measured for each. In this research, a statistical analysis was conducted using Minitab 16.



Among the parameters, welding current was the most significant, contributing 56.68% & 72.9%, whereas arc voltage had the least impact, contributing 10.38% & 0.71%. The angular distortion value varied from 8 to 13.8 for plates and from 5 to 9.8 for profiles in the study.



The paper was based on the GMAW process, which is widely used in the automotive industry. Future research could consider the effect of FCAW, GTAW, and SAW process parameters on angular distortion. In addition, St37 steel, a common carbon steel, was used in this paper, while St52 and St44 steels can be used for future studies.



The findings of the paper have important practical implications for the automotive industry. In the design and production of steel structures, it is very important to control and reduce angular distortion in welded joints. Because angular distortion causes dimensional errors and increases the effort and cost of structure modification.



There is relatively little information on the statistical analysis of angular distortion in low-carbon steels, and most research is purely experimental. In addition, there is very little literature on the angular distortion of steel profiles. Welding steel profiles is widely used in automotive manufacturing. The results of this research can be used to control and reduce angular distortion in welding joints of low-carbon steels.

Zitieren

APA

Ghazvinloo, H. (2026). A statistical investigation on angular distortion in gas metal arc welding process. Journal of Achievements in Materials and Manufacturing Engineering. https://doi.org/10.5604/01.3001.0055.7854

Vancouver

Ghazvinloo H. A statistical investigation on angular distortion in gas metal arc welding process. Journal of Achievements in Materials and Manufacturing Engineering. 2026. doi:10.5604/01.3001.0055.7854

BibTeX
@article{Ghazvinloo2026,
  author = {Ghazvinloo, H.R.},
  title = {A statistical investigation on angular distortion in gas metal arc welding process},
  journal = {Journal of Achievements in Materials and Manufacturing Engineering},
  year = {2026},
  doi = {10.5604/01.3001.0055.7854}
}
Kostenlos starten →