EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of input parameters to determine the shape of weld bead in cladding on 316L stainless steel using the Taguchi method

Raviram R, Sachithananthan J, Mohandass M, Gurusamy V

Materials Open Research · 2023

DOI: 10.12688/materialsopenres.17569.1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Open Research, 2023. Verfasst von Raviram R und 3 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

The Cold Metal Transfer (CMT) process, with its low heat input, is selected for cladding carbon steel in demanding industries such as mining, oil, gas, offshore, steel, and metal. Limited research exists on the utilization of Taguchi's technique in welding and cladding processes. The main objective of the present research is to employ the Taguchi approach for determining the impact of CMT parameters on the cladding geometry of 316L stainless steel.

Methods

The influence of process parameters on the weld bead was examined using both Signal-to-Noise (S/N) ratio and Analysis of Variance (ANOVA) by implementing an orthogonal array. A structural steel substrate was coated with nickel-based metal inert gas (MIG) welding wire using the CMT process while being shielded by a 99.9 percent pure argon gas. To attain the desired quality of weld bead, the CMT input parameters and geometry of the bead are separately and collectively optimized.

Results

When the welding current (I w ) is set at 130A, welding speed (V) at 200 mm/min, and the distance between the nozzle and plate (X) at 5 mm, the Taguchi method indicates that the desired outcome is obtained with the following parameters: a penetration (P) of 1.115 mm, a reinforcement (R) of 1.51 mm, a bead width (W) of 4.265 mm, and a percentage of dilution (D) of 21.145%.

Conclusions

The research findings indicate, under certain limitations, the techniques of the Taguchi method be utilized to efficiently manage the CMT cladding process parameters.

Zitieren

APA

R, R., J, S., M, M., & V, G. (2023). Influence of input parameters to determine the shape of weld bead in cladding on 316L stainless steel using the Taguchi method. Materials Open Research. https://doi.org/10.12688/materialsopenres.17569.1

Vancouver

R R, J S, M M, V G. Influence of input parameters to determine the shape of weld bead in cladding on 316L stainless steel using the Taguchi method. Materials Open Research. 2023. doi:10.12688/materialsopenres.17569.1

BibTeX
@article{R2023,
  author = {R, Raviram and J, Sachithananthan and M, Mohandass and V, Gurusamy},
  title = {Influence of input parameters to determine the shape of weld bead in cladding on 316L stainless steel using the Taguchi method},
  journal = {Materials Open Research},
  year = {2023},
  doi = {10.12688/materialsopenres.17569.1}
}
Kostenlos starten →