EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Parameter Optimization and Mechanical Properties of Laser Cladding of 316L Stainless Steel Powder on G20Mn5QT Steel

Yunjie Fan, Yongsheng Zhao, Yan Liu, Shao Xie, Chao Ge, Xiaohui Han, Hui Chen

Coatings · 21.02.2023 · 13 (3) · 481

DOI: 10.3390/coatings13030481 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 21.02.2023. Verfasst von Yunjie Fan und 6 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sichuan Provincial Science and Technology Plan Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

G20Mn5QT steel has excellent mechanical properties and is widely used in key components of rail vehicles. However, during the operation of high-speed vehicles, wear and tear will inevitably occur. In this paper, laser cladding technology was selected to successfully prepare 316L stainless steel coating. The optimum processing parameters were obtained with a laser power of 2300 W, a scanning speed of 500 mm/min, and a powder feeding speed of 14 g/min. The microstructure of 316L coating is mainly composed of planar crystals, cellular crystals, columnar crystals, and equiaxed crystals. Through range analysis, it is found that the microhardness, wear resistance, and micro-shear strength of the cladding layers increase with the increase of laser power, while the tensile strength and yield strength increase first and then decrease with the increase of laser power. Under the optimized process parameters, the low-temperature impact toughness, elongation, tensile strength, and yield strength of the cladding layer were 97.6%, 24%, 10.9%, and 32.5% higher than that of the G20Mn5QT substrate, respectively. An excellent combination of strength and toughness was achieved by cladding 316L alloy on the surface of the G20Mn5QT substrate, which can meet the requirements of remanufacturing fractional key vehicle parts.

Förderung

  • Sichuan Provincial Science and Technology Plan Project

Zitieren

APA

Fan, Y., Zhao, Y., Liu, Y., Xie, S., Ge, C., Han, X., & Chen, H. (2023). Parameter Optimization and Mechanical Properties of Laser Cladding of 316L Stainless Steel Powder on G20Mn5QT Steel. Coatings, 13(3), 481. https://doi.org/10.3390/coatings13030481

Vancouver

Fan Y, Zhao Y, Liu Y, Xie S, Ge C, Han X, et al. Parameter Optimization and Mechanical Properties of Laser Cladding of 316L Stainless Steel Powder on G20Mn5QT Steel. Coatings. 2023;13(3):481. doi:10.3390/coatings13030481

BibTeX
@article{Fan2023,
  author = {Fan, Yunjie and Zhao, Yongsheng and Liu, Yan and Xie, Shao and Ge, Chao and Han, Xiaohui and Chen, Hui},
  title = {Parameter Optimization and Mechanical Properties of Laser Cladding of 316L Stainless Steel Powder on G20Mn5QT Steel},
  journal = {Coatings},
  year = {2023},
  volume = {13},
  number = {3},
  pages = {481},
  doi = {10.3390/coatings13030481}
}
Kostenlos starten →