EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Monitoring concept for powder flow monitoring in Laser-Directed Energy Deposition (L-DED) process based on flexible piezoelectric sensors

Vojislav Petrovic-Filipovic, Richard Görgl, Michael Suppan, Jan Hesse, Wolfgang Waldhauser

Materials Open Research · 2022

DOI: 10.12688/materialsopenres.17427.1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Open Research, 2022. Verfasst von Vojislav Petrovic-Filipovic und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Austria Research Promotion Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

The quality of powder-blown Laser-Directed Energy Deposition (L-DED) is mainly governed by the energy density per unit of mass employed to melt the material. In most of the previous works, the focus in process monitoring and control was on the control of energy input, by controlling the properties of the melt pool. However, the powder mass input is as important to monitor as the energy input, in order to preserve the equilibrium of the process.

Methods

In this paper, the authors present the first test results of the Pyzoflex® sensor for powder flow monitoring in L-DED using real powder feeding system in the robot-based laser-processing cell. The sensor was tested against the powder projected from the powder feeder under typical flow regimes and the real-time measurements were taken using a specifically designed software tool.

Results

The graphical representation of the registered sensor signals are clearly correlated with the powder flow values set at the powder feeder, which demonstrates that the piezoelectric sensors can detect the powder flow with elevated precision in real time.

Conclusions

The first laboratory tests of flexible printed piezoelectric sensors demonstrate that they are fast and precise in the powder flow measurement, but that more effort must be invested in the robustness of the measurement setup as well as in clearing and stabilization of the registered signal.

Förderung

  • Austria Research Promotion Agency

Zitieren

APA

Petrovic-Filipovic, V., Görgl, R., Suppan, M., Hesse, J., & Waldhauser, W. (2022). Monitoring concept for powder flow monitoring in Laser-Directed Energy Deposition (L-DED) process based on flexible piezoelectric sensors. Materials Open Research. https://doi.org/10.12688/materialsopenres.17427.1

Vancouver

Petrovic-Filipovic V, Görgl R, Suppan M, Hesse J, Waldhauser W. Monitoring concept for powder flow monitoring in Laser-Directed Energy Deposition (L-DED) process based on flexible piezoelectric sensors. Materials Open Research. 2022. doi:10.12688/materialsopenres.17427.1

BibTeX
@article{PetrovicFilipovic2022,
  author = {Petrovic-Filipovic, Vojislav and Görgl, Richard and Suppan, Michael and Hesse, Jan and Waldhauser, Wolfgang},
  title = {Monitoring concept for powder flow monitoring in Laser-Directed Energy Deposition (L-DED) process based on flexible piezoelectric sensors},
  journal = {Materials Open Research},
  year = {2022},
  doi = {10.12688/materialsopenres.17427.1}
}
Kostenlos starten →