EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of dynamic wire feeding on metal transfer in laser-directed energy deposition (L-DED)

Manoel Kolling Dutra, Caio Linhares Prujansky, Milton Pereira, Régis Henrique Gonçalves e Silva, Marcelo Pompermaier Okuyama

The International Journal of Advanced Manufacturing Technology · 2026-03 · 143 (5-6) · 2487-2498

DOI: 10.1007/s00170-026-17735-0 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 21.02.2026. Verfasst von Manoel Kolling Dutra und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidade Federal De Santa Catarina.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dynamic wire feeding has recently emerged as a promising strategy to improve control over melt-pool dynamics and energy distribution in wire-laser directed energy deposition (WL-DED). Unlike conventional continuous feeding, where the wire maintains a stable liquid-bridge transfer, dynamic feeding introduces periodic advancement and retraction of the wire, enabling active modulation of local heat input and wetting behavior. In this study, high-speed imaging and quantitative analyses of melt-pool area, contact angle, and bead cross-sections were performed to compare continuous and dynamic feeding conditions. Continuous feeding provided stable melt-pool geometry and uniform bead morphology, while dynamic feeding introduced controlled fluctuations that allowed tailoring of energy density and interfacial stability. Frequency modulation revealed that lower oscillation frequencies favored pool expansion, whereas higher frequencies reduced energy accumulation, defining an operational window between stability and adaptability. Contact angle analysis confirmed that dynamic feeding actively altered wettability, and bead cross-sections showed narrower geometries with increased dilution under dynamic conditions. These results demonstrate that dynamic wire feeding is not a substitute but a complementary strategy to continuous feeding, offering new opportunities for adaptive control of melt-pool dynamics and deposition quality in WL-DED.

Förderung

  • Universidade Federal De Santa Catarina

Zitieren

APA

Dutra, M. K., Prujansky, C. L., Pereira, M., Silva, R. H. G. E., & Okuyama, M. P. (2026). Influence of dynamic wire feeding on metal transfer in laser-directed energy deposition (L-DED). The International Journal of Advanced Manufacturing Technology, 143(5-6), 2487-2498. https://doi.org/10.1007/s00170-026-17735-0

Vancouver

Dutra MK, Prujansky CL, Pereira M, Silva RHGE, Okuyama MP. Influence of dynamic wire feeding on metal transfer in laser-directed energy deposition (L-DED). The International Journal of Advanced Manufacturing Technology. 2026;143(5-6):2487-2498. doi:10.1007/s00170-026-17735-0

BibTeX
@article{Dutra2026,
  author = {Dutra, Manoel Kolling and Prujansky, Caio Linhares and Pereira, Milton and Silva, Régis Henrique Gonçalves e and Okuyama, Marcelo Pompermaier},
  title = {Influence of dynamic wire feeding on metal transfer in laser-directed energy deposition (L-DED)},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  volume = {143},
  number = {5-6},
  pages = {2487--2498},
  doi = {10.1007/s00170-026-17735-0}
}
Kostenlos starten →