EUVIMEDOpdag EUVIMED
Open access · CC BY-NC-ND 4.0

Final shade and whiteness: impact of various ultra-thin CAD/CAM veneers and tooth-colored resin substrates

Yinghui Wang, Xia Wei, Linjuan Gao, Dingkun Liu, Xing Chen, Liujun Lin, Yu Pan, Hao Yu, Guang Hong, Hui Cheng

BMC Oral Health · 2025

DOI: 10.1186/s12903-025-05901-x ↗

At a glance

Journal article in BMC Oral Health, 2025. Written by Yinghui Wang and 9 co-authors. Institution: Fujian Key Laboratory of Oral Diseases & Fujian Provincial Engineering Research Center of Oral Biomaterial & Stomatological Key Lab of Fujian College…. Major MEDLINE topics: Dental Veneers, Computer-Aided Design, Composite Resins, Prosthesis Coloring. Cited 5 times so far (Crossref); 55 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Fujian Province Natural Science Foundation of China, Major Project of Fujian Province Science and Technology Innovation Joint Fund.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

BACKGROUND: Achieving optimal color control in chairside CAD/CAM ultra-thin veneers, remains a significant challenge for dental clinicians and technicians. This study aims to investigate the effect of ultra-thin CAD/CAM medium translucency (MT) lithium disilicate veneers and tooth-colored resin substrates on final tooth shade and whiteness. MATERIALS AND METHODS: Disk-shaped ceramic veneers (IPS e.max CAD MT, Ivoclar Vivadent, Liechtenstein) with a thickness of 0.3 mm were fabricated in BL2, BL3, BL4, B1, A1, A2, and A3 shades. Additionally, 4-mm thick resin substrates (Tetric N-Ceram, Ivoclar Vivadent, Liechtenstein) were prepared in A2, A3, A3.5, and A4 shades to simulate tooth-colored substrates. Veneer-resin composites were prepared by combining veneer specimens and resin substrates. Color coordinates of tooth-colored resin substrates (R), veneer-resin composites (C) and the shade guide tabs (G) were obtained using a spectroradiometer. Color differences of ΔE00(C-R), ΔE00(C-G) and ΔE00(R-G) were then calculated with the CIEDE2000 formula. The initial and final shades were considered matched when ΔE00(R-G) or ΔE00(C-G) was clinically acceptable or minimal. Additionally, whiteness differences (ΔWID) between R and C specimens were recorded. Two-way analysis of variance (ANOVA) was performed, followed by the Tukey HSD. The significance level was set at p 0.05). They increased with darker resin substrates and lighter veneers, except for no significant differences among BL4, B1, and A1 veneers. The largest color difference was observed for BL2 veneers on A4 substrates (ΔE00(C-R) = 6.9 ± 0.3, ΔWID = 19.0 ± 1.5), while the smallest occurred with A3 veneers on A2 substrates (ΔE00(C-R) = 2.4 ± 0.6, ΔWID = 5.6 ± 1.0). Final tooth shades were maximally transformed to lighter shades, with A2, A3, A3.5, and A4 substrates shifting to 2M1, 2L1.5, 2R2.5, and 3L1.5, respectively. CONCLUSIONS: Both resin substrates and veneer shades significantly influence final tooth shade and whiteness independently. 0.3-mm thick CAD/CAM MT lithium disilicate veneers produce substantial shade and whiteness transformations, making them effective for shade enhancement.

Subjects

MeSH terms (MEDLINE)

Dental VeneersComputer-Aided DesignComposite ResinsProsthesis ColoringDental Prosthesis DesignDental PorcelainColorHumansDental Materials

Author keywords

CAD/CAMColor differenceLithium disilicateShadeUltra-thin veneerWhiteness

Substances

Dental PorcelainComposite Resinslithia disilicateDental Materials

Authors and institutions

  • Fujian Key Laboratory of Oral Diseases & Fujian Provincial Engineering Research Center of Oral Biomaterial & Stomatological Key Lab of Fujian College and University, School and Hospital of Stomatology, Fujian Medical Un…
  • Institute of Stomatology & Research Center of Dental Esthetics and Biomechanics, School and Hospital of Stomatology, Fujian Medical University, Fuzhou, China.
  • Division for Globalization Initiative, Liaison Center for Innovative Dentistry, Tohoku University Graduate School of Dentistry, 4 - 1 Seiryo-Machi, Aoba-Ku, Sendai, 980 - 8575, Japan. hong.guang.d6@tohoku.ac.jp.
  • Institute of Stomatology & Research Center of Dental Esthetics and Biomechanics, School and Hospital of Stomatology, Fujian Medical University, Fuzhou, China. ch_fujian@163.com.

Funding

  • Fujian Province Natural Science Foundation of China
  • Major Project of Fujian Province Science and Technology Innovation Joint Fund

Cite

APA

Wang, Y., Wei, X., Gao, L., Liu, D., Chen, X., Lin, L., Pan, Y., Yu, H., Hong, G., & Cheng, H. (2025). Final shade and whiteness: impact of various ultra-thin CAD/CAM veneers and tooth-colored resin substrates. BMC Oral Health. https://doi.org/10.1186/s12903-025-05901-x

Vancouver

Wang Y, Wei X, Gao L, Liu D, Chen X, Lin L, et al. Final shade and whiteness: impact of various ultra-thin CAD/CAM veneers and tooth-colored resin substrates. BMC Oral Health. 2025. doi:10.1186/s12903-025-05901-x

BibTeX
@article{Wang2025,
  author = {Wang, Yinghui and Wei, Xia and Gao, Linjuan and Liu, Dingkun and Chen, Xing and Lin, Liujun and Pan, Yu and Yu, Hao and Hong, Guang and Cheng, Hui},
  title = {Final shade and whiteness: impact of various ultra-thin CAD/CAM veneers and tooth-colored resin substrates},
  journal = {BMC Oral Health},
  year = {2025},
  doi = {10.1186/s12903-025-05901-x}
}
Start for free →