EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Development and Preliminary Dosimetric Evaluation of a 3D-Printed Custom Tissue Compensator for Head and Neck Cancer Radiotherapy: A Proof-of-Concept Case Series

Chuxiang Jian iD, Xiang Xia, Jiazhou Wang, Chenlu Lian, Xuexue Cao, Ping Zhou, Dayu Xu, Qian Wu iD, Chengrun Du

Technology in Cancer Research & Treatment · 2026-08 · 25

DOI: 10.1177/15330338261478186 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Technology in Cancer Research & Treatment, online erschienen am 13.08.2026. Verfasst von Chuxiang Jian und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Radiation Oncology, Fudan University Shanghai Cancer Center, Shanghai, China. Hauptthemen laut MEDLINE: Head and Neck Neoplasms, Printing, Three-Dimensional, Radiotherapy Planning, Computer-Assisted. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Xiamen Health Commission High-Quality Development S&T Talent Nurturing Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Introduction

Achieving an optimal therapeutic ratio in head and neck cancer (HNC) radiotherapy requires balancing dose conformity with organ-at-risk (OAR) sparing. Traditional auxiliary devices often lack the customized geometry needed for modern techniques. This study developed and evaluated a 3D-printed integrated tissue compensator that serves as both a positioning stent for OAR displacement and a conformal bolus for dose build-up.

Methods

In this case series, five HNC patients (including floor of mouth, tongue, and nasal cavity and sinus cancers) were prospectively and consecutively enrolled, and their computed tomography (CT) data were used to fabricate the compensators. Dosimetric comparisons were conducted between the 3D-printed compensator, a simulated air cavity, and a conventional bite block.

Results

The integrated device demonstrated adequate geometric fidelity, maintaining random translational setup errors (σ) at ≤ 1.34 mm, comparable to traditional immobilization. Compared to the conventional group, the device demonstrated a numerical reduction in the maximum dose to the hard palate and the mean dose to the external surface, while ensuring effective dose build-up in the target region. Compared with the air cavity group, the observed numerical reductions in dose for key OARs (oral cavity, mandible, and parotid gland) approached but did not reach conventional statistical significance (p = 0.063). Furthermore, the device maintained comparable conformity (CI) and homogeneity (HI) indices, showing an observed numerical improvement in homogeneity for high-dose targets.

Conclusion

This feasibility study demonstrates that a 3D-printed integrated tissue compensator offers potential dosimetric advantages over conventional approaches. By maintaining setup reproducibility and OAR sparing, this device represents a practical exploratory tool for HNC radiotherapy.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Head and Neck NeoplasmsPrinting, Three-DimensionalRadiotherapy Planning, Computer-AssistedHumansRadiotherapy DosageRadiometryTomography, X-Ray ComputedFemaleOrgans at RiskMaleMiddle AgedAged

Stichwörter der Autor:innen

3D printingboluscase serieshead and neck canceroral stentradiotherapytissue compensator

Autor:innen und Institutionen

  • Department of Radiation Oncology, Fudan University Shanghai Cancer Center, Shanghai, China.
  • Department of Radiation Oncology, Xiamen Cancer Hospital, Xiamen, Fujian, China.

ORCID-Profile: Chuxiang Jian, Qian Wu

Förderung

  • Xiamen Health Commission High-Quality Development S&T Talent Nurturing Program

Zitieren

APA

Jian, C., Xia, X., Wang, J., Lian, C., Cao, X., Zhou, P., Xu, D., Wu, Q., & Du, C. (2026). Development and Preliminary Dosimetric Evaluation of a 3D-Printed Custom Tissue Compensator for Head and Neck Cancer Radiotherapy: A Proof-of-Concept Case Series. Technology in Cancer Research & Treatment, 25. https://doi.org/10.1177/15330338261478186

Vancouver

Jian C, Xia X, Wang J, Lian C, Cao X, Zhou P, et al. Development and Preliminary Dosimetric Evaluation of a 3D-Printed Custom Tissue Compensator for Head and Neck Cancer Radiotherapy: A Proof-of-Concept Case Series. Technology in Cancer Research & Treatment. 2026;25. doi:10.1177/15330338261478186

BibTeX
@article{Jian2026,
  author = {Jian, Chuxiang and Xia, Xiang and Wang, Jiazhou and Lian, Chenlu and Cao, Xuexue and Zhou, Ping and Xu, Dayu and Wu, Qian and Du, Chengrun},
  title = {Development and Preliminary Dosimetric Evaluation of a 3D-Printed Custom Tissue Compensator for Head and Neck Cancer Radiotherapy: A Proof-of-Concept Case Series},
  journal = {Technology in Cancer Research & Treatment},
  year = {2026},
  volume = {25},
  doi = {10.1177/15330338261478186}
}
Kostenlos starten →