EUVIMEDEUVIMED entdecken
Crossref

Influence of profile-edge geometry on Yttria-Stabilized Zirconia reinforced AA6061 friction stir welds

VSN Venkata Ramana, K Sri Ram Vikas, Rahul, Koona Bhavani, Namburi Harsha

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications · 04.08.2026

DOI: 10.1177/14644207261472386 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, online erschienen am 04.08.2026. Verfasst von VSN Venkata Ramana und 4 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the current study, the effects of edge profile configuration and reinforcement with Yttria-Stabilized Zirconia (YSZ) particles on the microstructure, crystallographic texture, and mechanical properties of friction stir welded AA6061-T651 aluminum alloy joints are investigated. A novel profile-edge joint configuration is employed to improve material flow and particle dispersion in friction stir welding, and is compared with a conventional straight-edge joint configuration. Electron Backscattered Diffraction (EBSD) analysis showed that the profile-edge configuration results in better microstructural refinement of the joint, with an average grain size of 6.6 μm compared with 8.4 μm for the straight-edge joint. Moreover, the amount of high-angle grain boundaries increases from 40.1% to 46.3% due to improved recrystallization. Texture analysis has shown that shear texture components are more pronounced in the profile-edge joint, where the maximum texture intensity is 13.6 times that of a random distribution. Microanalysis of the profile-edge joint using Scanning Electron Microscope (SEM) and Energy Dispersive Spectroscopy (EDX) showed that yttria-stabilized zirconia particles were successfully incorporated into the stir zone with a relatively uniform distribution. Phases α-Al, Mg 2 Si, Al 5 FeSi, zirconia, and yttria-stabilized zirconia have been identified by X-Ray Diffraction (XRD) analysis. The profile-edge configuration resulted in an improved hardness of up to 105 HV, compared with 101 HV for the straight-edge configuration. The mechanical properties are considerably improved in the profile-edge joint, with an ultimate tensile strength of 348 ± 12.9 MPa, a yield strength of 311 ± 10.4 MPa, and an elongation of 12.8 ± 2.5%, resulting in a joint efficiency of 92–95%. Fractographic analysis indicates a ductile fracture with evenly distributed dimples.

Zitieren

APA

Ramana, V. V., Vikas, K. S. R., Rahul, Bhavani, K., & Harsha, N. (2026). Influence of profile-edge geometry on Yttria-Stabilized Zirconia reinforced AA6061 friction stir welds. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. https://doi.org/10.1177/14644207261472386

Vancouver

Ramana VV, Vikas KSR, Rahul, Bhavani K, Harsha N. Influence of profile-edge geometry on Yttria-Stabilized Zirconia reinforced AA6061 friction stir welds. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2026. doi:10.1177/14644207261472386

BibTeX
@article{Ramana2026,
  author = {Ramana, VSN Venkata and Vikas, K Sri Ram and Rahul and Bhavani, Koona and Harsha, Namburi},
  title = {Influence of profile-edge geometry on Yttria-Stabilized Zirconia reinforced AA6061 friction stir welds},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications},
  year = {2026},
  doi = {10.1177/14644207261472386}
}
Kostenlos starten →