EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Properties of WC-Co Cemented Carbide Reinforced with Yttria-Stabilized Zirconia Nanoparticles

Boranbay Ratov, Volodymyr Mechnik, Edvin Hevorkian, Miroslaw Rucki, Daniel Pieniak, Mykola Bondarenko, Vasyl Kolodnitskyi, Sergii Starik, Volodymyr Chishkala, Aidar Kuttybaev, Galiya Akhmedyanova, Anar Abilakhanova

Journal of Composites Science · 12.03.2026 · 10 (3) · 156

DOI: 10.3390/jcs10030156 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 12.03.2026. Verfasst von Boranbay Ratov und 11 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan, Ministry of Education and Science of Ukraine.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To produce strong and wear-resistant tools for the rock drilling industry, the most commonly used metal matrix composites contain the reinforcing phase of cemented carbide. There are numerous research reports on attempts to improve the performance of WC-Co composites. The paper is a continuation of previously reported research on the SPS-processed WC–6 wt.%Co metal matrix composites with yttria-stabilized zirconia (YSZ) addition in amounts of 4 wt.% and 10 wt.%. The sintered specimens were polished and underwent the microindentation tests with a Vickers shape diamond tip. The following parameters were measured: stiffness S, the Poisson number ν, indentation creep CIT, relaxation RIT, indentation hardness HIT, indentation Vickers hardness HVIT, Martens hardness HM, reduced modulus E*, and indentation elastic modulus EIT. The tests revealed hardness values of 16.2–17.0 GPa and indentation elastic moduli in the range of 607–670 GPa. Moreover, respective plastic and elastic parts of the indentation work Wplast and Welast were determined. It was found that YSZ addition slightly reduced hardness and modulus, but all the three wear parameters, H/E, H3/E2, and 1/(E2H), increased after addition of zirconia. Specifically, for 10 wt.% ZrO2 H/E increased by 5%, H3/E2 by 7%, while 1/(E2H) by 27% compared to 94WC–6Co composition.

Förderung

  • Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan
  • Ministry of Education and Science of Ukraine

Zitieren

APA

Ratov, B., Mechnik, V., Hevorkian, E., Rucki, M., Pieniak, D., Bondarenko, M., Kolodnitskyi, V., Starik, S., Chishkala, V., Kuttybaev, A., Akhmedyanova, G., & Abilakhanova, A. (2026). Properties of WC-Co Cemented Carbide Reinforced with Yttria-Stabilized Zirconia Nanoparticles. Journal of Composites Science, 10(3), 156. https://doi.org/10.3390/jcs10030156

Vancouver

Ratov B, Mechnik V, Hevorkian E, Rucki M, Pieniak D, Bondarenko M, et al. Properties of WC-Co Cemented Carbide Reinforced with Yttria-Stabilized Zirconia Nanoparticles. Journal of Composites Science. 2026;10(3):156. doi:10.3390/jcs10030156

BibTeX
@article{Ratov2026,
  author = {Ratov, Boranbay and Mechnik, Volodymyr and Hevorkian, Edvin and Rucki, Miroslaw and Pieniak, Daniel and Bondarenko, Mykola and Kolodnitskyi, Vasyl and Starik, Sergii and Chishkala, Volodymyr and Kuttybaev, Aidar and Akhmedyanova, Galiya and Abilakhanova, Anar},
  title = {Properties of WC-Co Cemented Carbide Reinforced with Yttria-Stabilized Zirconia Nanoparticles},
  journal = {Journal of Composites Science},
  year = {2026},
  volume = {10},
  number = {3},
  pages = {156},
  doi = {10.3390/jcs10030156}
}
Kostenlos starten →