EUVIMEDEUVIMED entdecken
Crossref

Push-Out experiments on bearing capacity of perfobond leiste shear connectors after hydrochloric acid corrosion

Wenjing Qiao, Zhiyong Wang, Fan Yang, Baojun Zhao, Yunlong Li

Advances in Structural Engineering · 2023-07 · 26 (9) · 1735-1751

DOI: 10.1177/13694332231174251 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Structural Engineering, online erschienen am 12.05.2023. Verfasst von Wenjing Qiao und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: Scientific Research Program of Shaanxi Provincial Education Department, the Key R and D Projects of Shaanxi Province, the Science and Technology Innovation Team Project of Shaanxi Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper study the shear bearing performance and failure mechanism of perfobond leiste (PBL) shear connectors after hydrochloric acid corrosion. Seven groups of specimens with PBL shear connectors were designed, these PBL shear connectors suffered from hydrochloric acid corrosion time of 0 h, 1 h, 4 h, 12 h, 24 h, 48 h and 72 h. Herein, loading process, shear bearing capacity, load-slip curve, and failure mode were obtained by the push-out experiment, and then refined the finite element model (FEM) was established. Following the parameter analysis of 14 experiment specimens and 77 finite element models, the force mechanism of PBL shear connectors after hydrochloric acid corrosion were analyzed. With the extension of the corrosion time of PBL shear connectors, the shear capacity, deformation capacity, and slip decrease gradually. Among them, the finite element parameter analysis of PBL shear connectors demonstrates that their shear bearing capacity has the ability to be modified by raising the concrete strength, the diameter of penetrated steel bar, the diameter of steel plate holes, and changing the end bearing mode. On condition that the concrete strength is raised from C30 to C60, the shear capacity is reduced by 5.19%. When the diameter of penetrated steel bar has mushroomed from 12 mm to 25 mm, the shear capacity declines by 9.59%. Meanwhile, the shear bearing capacity of the end bearing is about 2 times of the non-end bearing. Once the diameter of steel plate holes adds 35 mm to 65 mm, the shear capacity just decreases by 2.48%. Finally, the reliability of PBL shear connectors are analyzed by the exit experiment data and the shear bearing capacity formula of PBL shear connectors. The research results can offer a reference for the shear bearing capacity of PBL shear connectors after hydrochloric acid corrosion.

Förderung

  • Scientific Research Program of Shaanxi Provincial Education Department
  • the Key R and D Projects of Shaanxi Province
  • the Science and Technology Innovation Team Project of Shaanxi Province

Zitieren

APA

Qiao, W., Wang, Z., Yang, F., Zhao, B., & Li, Y. (2023). Push-Out experiments on bearing capacity of perfobond leiste shear connectors after hydrochloric acid corrosion. Advances in Structural Engineering, 26(9), 1735-1751. https://doi.org/10.1177/13694332231174251

Vancouver

Qiao W, Wang Z, Yang F, Zhao B, Li Y. Push-Out experiments on bearing capacity of perfobond leiste shear connectors after hydrochloric acid corrosion. Advances in Structural Engineering. 2023;26(9):1735-1751. doi:10.1177/13694332231174251

BibTeX
@article{Qiao2023,
  author = {Qiao, Wenjing and Wang, Zhiyong and Yang, Fan and Zhao, Baojun and Li, Yunlong},
  title = {Push-Out experiments on bearing capacity of perfobond leiste shear connectors after hydrochloric acid corrosion},
  journal = {Advances in Structural Engineering},
  year = {2023},
  volume = {26},
  number = {9},
  pages = {1735--1751},
  doi = {10.1177/13694332231174251}
}
Kostenlos starten →