EUVIMEDEUVIMED entdecken
Crossref

Digital representation of the wear behaviour of Ti-6Al-4V and Ti-6Al-7Nb biomaterial alloys: A fractal analysis of the worn surface

João Almeida, Ana Horovistiz, J Paulo Davim

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology · 2023-05 · 237 (5) · 1156-1169

DOI: 10.1177/13506501221146210 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, online erschienen am 02.01.2023. Verfasst von João Almeida und 2 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 30 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Currently, Ti-6Al-4V alloy is one of the most used materials in biomedical devices, namely in orthopedic prothesis, thanks to its outstanding properties. However, its composition contains vanadium ions, considered toxic to the human body. Since the 1980s, there has been a growing effort to replace this alloy with less toxic alternatives. A promising candidate is the Ti-6Al-7Nb alloy. There are relatively few studies on the surface properties of this alloy, on the other hand, the knowledge of its tribological performance is of great importance for the use of this alloy in biomedical applications. Digital tribology has great potential in a quantitative inspection of wear in materials engineering. Methodologies of surface inspection, such as fractal description, can explain the relationship between microstructural, tribological parameters, and surface roughness. In this work, the inspection of the fractal behavior of worn surfaces of both Ti-6Al-4V and Ti-6Al-7Nb samples was carried out. Tribological tests were performed in a block-on-disk tribometer, using AISI 1045 steel as antagonist material, under different conditions. The fractal values were correlated to tribological parameters and the evolution of morphological aspects along the surface. Elevation maps of the sliding surfaces were built from pictures obtained from optical microscopy (OM). The “Extended depth from focus”, (EDF) reconstruction method, allowed the ordering of stacks of images to conduct a quantitative investigation of the behavior of surfaces.

Zitieren

APA

Almeida, J., Horovistiz, A., & Davim, J. P. (2023). Digital representation of the wear behaviour of Ti-6Al-4V and Ti-6Al-7Nb biomaterial alloys: A fractal analysis of the worn surface. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237(5), 1156-1169. https://doi.org/10.1177/13506501221146210

Vancouver

Almeida J, Horovistiz A, Davim JP. Digital representation of the wear behaviour of Ti-6Al-4V and Ti-6Al-7Nb biomaterial alloys: A fractal analysis of the worn surface. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2023;237(5):1156-1169. doi:10.1177/13506501221146210

BibTeX
@article{Almeida2023,
  author = {Almeida, João and Horovistiz, Ana and Davim, J Paulo},
  title = {Digital representation of the wear behaviour of Ti-6Al-4V and Ti-6Al-7Nb biomaterial alloys: A fractal analysis of the worn surface},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology},
  year = {2023},
  volume = {237},
  number = {5},
  pages = {1156--1169},
  doi = {10.1177/13506501221146210}
}
Kostenlos starten →