Effect of substrate temperature on mechanical and electrochemical properties of flame-sprayed coatings for Titanium implants
Bio-Medical Materials and Engineering · 2026
DOI: 10.1177/09592989261476170 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bio-Medical Materials and Engineering, 2026. Verfasst von Trong-Linh Nguyen und 1 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Hung Yen University of Technology and Education, Hung Yen, Vietnam. Hauptthemen laut MEDLINE: Titanium, Coated Materials, Biocompatible, Durapatite, Prostheses and Implants. Die Arbeit nennt 42 Literaturangaben.
Abstract (Originalsprache)
Background
Hydroxyapatite (HA) coatings on titanium (Ti) implants are widely studied owing to their biocompatibility and osteoconductivity. However, the effect of substrate temperature during flame spraying on coating performance remains unclear.
Objective
This study investigated the influence of substrate temperature on the microstructure, mechanical properties, and electrochemical behavior of flame-sprayed HA coatings on Ti implants.
Methods
HA coatings were deposited on commercially pure Ti Grade 2 substrates by flame spraying at room temperature (RT) and 300 °C. The coatings were characterized by XRD, FTIR, XPS, SEM, and EDS. Surface roughness, adhesion strength, abrasion resistance, potentiodynamic polarization, and electrochemical impedance spectroscopy were evaluated.
Results
Substrate heating at 300 °C modified the crystalline phase composition and slightly increased the apparent HA crystallite size and crystalline peak index. The 300 °C coating exhibited a more compact surface morphology, higher adhesion strength, lower abrasion-induced mass loss, lower corrosion current density, and higher charge transfer resistance than the RT coating.
Conclusion
Substrate heating at 300 °C improved the mechanical durability and corrosion resistance of flame-sprayed HA coatings, indicating its usefulness for enhancing Ti implant coating performance.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering, Hung Yen University of Technology and Education, Hung Yen, Vietnam.
- Department of Mechanical Engineering, National Kaohsiung University of Sciences and Technology, Kaohsiung, Taiwan.
ORCID-Profile: Trong-Linh Nguyen
Zitieren
APA
Nguyen, T. L., & Cheng, T. C. (2026). Effect of substrate temperature on mechanical and electrochemical properties of flame-sprayed coatings for Titanium implants. Bio-Medical Materials and Engineering. https://doi.org/10.1177/09592989261476170
Vancouver
Nguyen TL, Cheng TC. Effect of substrate temperature on mechanical and electrochemical properties of flame-sprayed coatings for Titanium implants. Bio-Medical Materials and Engineering. 2026. doi:10.1177/09592989261476170
BibTeX
@article{Nguyen2026,
author = {Nguyen, Trong-Linh and Cheng, Tsung-Chieh},
title = {Effect of substrate temperature on mechanical and electrochemical properties of flame-sprayed coatings for Titanium implants},
journal = {Bio-Medical Materials and Engineering},
year = {2026},
doi = {10.1177/09592989261476170}
}
EUVIMED