EUVIMEDEUVIMED entdecken
Crossref

Groove shape effects on the performance of dry gas seals in supercritical CO 2 centrifugal compressors

Morteza Anbarsooz, Maryam Amiri

Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy · 2026-11 · 240 (7) · 1314-1330

DOI: 10.1177/09576509261434690 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, online erschienen am 11.03.2026. Verfasst von Morteza Anbarsooz und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Supercritical CO 2 (SCO 2 ) centrifugal compressors are pivotal components in next-generation high-efficiency power cycles (e.g., Brayton cycles), enabling greater than 50% thermal efficiency and compact power block designs essential for sustainable energy systems. This study addresses a critical reliability challenge by optimizing dry gas seal (DGS) groove designs for these compressors. Using validated 3D CFD simulations, incorporating k-ω SST turbulence model and Redlich-Kwong real gas equation of state, the performance of four industrial groove geometries (spiral, oval, fish-tail, and tree-type) are evaluated. Results demonstrate that the tree groove minimizes leakage (29.7% reduction vs. spiral) through tortuous flow paths, directly supporting emissions control and operational economy in power cycles. Conversely, spiral grooves maximize opening force and gas film stiffness (6.2% higher stiffness vs. tree), ensuring stable non-contact operation crucial for compressor reliability at extreme pressures. Oval and fish-tail grooves offer intermediate trade-offs. Thermal analysis reveals considerable localized high temperature zones due to viscous dissipation and adiabatic compression, a key consideration for material longevity. This work establishes that groove selection fundamentally balances leakage rate (optimized by tree grooves) against hydrodynamic stability (maximized by spiral grooves). These findings provide practical guidelines for enhancing DGS performance in SCO 2 compressors, directly contributing to the viability of high-efficiency, low-emission power generation.

Zitieren

APA

Anbarsooz, M., & Amiri, M. (2026). Groove shape effects on the performance of dry gas seals in supercritical CO 2 centrifugal compressors. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 240(7), 1314-1330. https://doi.org/10.1177/09576509261434690

Vancouver

Anbarsooz M, Amiri M. Groove shape effects on the performance of dry gas seals in supercritical CO 2 centrifugal compressors. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 2026;240(7):1314-1330. doi:10.1177/09576509261434690

BibTeX
@article{Anbarsooz2026,
  author = {Anbarsooz, Morteza and Amiri, Maryam},
  title = {Groove shape effects on the performance of dry gas seals in supercritical CO 2 centrifugal compressors},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy},
  year = {2026},
  volume = {240},
  number = {7},
  pages = {1314--1330},
  doi = {10.1177/09576509261434690}
}
Kostenlos starten →