Multi-objective optimization of vibration-assisted bone drilling parameters based on CCD and NSGA-II
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine · 2026-08 · 240 (8) · 805-819
DOI: 10.1177/09544119261464324 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, online erschienen am 13.07.2026. Verfasst von Ying Han und 4 weiteren Autor:innen. Beteiligte Einrichtung: Shandong Institute of Commerce and Technology, Jinan, China. Hauptthemen laut MEDLINE: Vibration, Genetic Algorithms, Bone and Bones, Orthopedic Procedures. Die Arbeit nennt 24 Literaturangaben.
Abstract (Originalsprache)
The drilling force, temperature and surface roughness during bone drilling critically determine bone tissue trauma and surgical performance. To address the difficulty of coordinating multiple conflicting indicators through single-objective optimization, this study conducts multi-objective parameters optimization of low-frequency vibration-assisted bone drilling. Central Composite Design (CCD) is employed to establish quadratic regression models for drilling force, drilling temperature and surface roughness with spindle speed, feed rate, voltage (amplitude), and vibration frequency as input variables. Model validity is confirmed via analysis of variance and residual analysis. Taking the simultaneous minimization of the three machining responses as the objective, the genetic algorithm (NSGA-II) is applied to acquire Pareto optimal solutions. The optimal parameter combination is determined as: spindle speed 2000 rpm, feed rate 0.18 mm/s, voltage 200 V, frequency 170 Hz. Corresponding predicted values are 35 N (drilling force), 61°C (temperature) and 1.05 μm (surface roughness). Validation experiments show that the prediction error of each indicator is within 15%, verifying the reliability of the proposed optimization method. Furthermore, when combined with drill bit pre-cooling, the drilling temperature decreased to 50.3°C, while drilling force and surface roughness remain at low levels. This study provides a low-damage, high-quality process parameter optimization method for bone drilling surgery, offering significant clinical application value.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Shandong Institute of Commerce and Technology, Jinan, China.
- Key Laboratory of Efficient and Clean Machinery Manufacturing of Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China.
- National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China.
ORCID-Profile: Qinhe Zhang
Zitieren
APA
Han, Y., Guo, Y., Zhou, X., Chen, Y., & Zhang, Q. (2026). Multi-objective optimization of vibration-assisted bone drilling parameters based on CCD and NSGA-II. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 240(8), 805-819. https://doi.org/10.1177/09544119261464324
Vancouver
Han Y, Guo Y, Zhou X, Chen Y, Zhang Q. Multi-objective optimization of vibration-assisted bone drilling parameters based on CCD and NSGA-II. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 2026;240(8):805-819. doi:10.1177/09544119261464324
BibTeX
@article{Han2026,
author = {Han, Ying and Guo, Yanchao and Zhou, Xianzheng and Chen, Yimiao and Zhang, Qinhe},
title = {Multi-objective optimization of vibration-assisted bone drilling parameters based on CCD and NSGA-II},
journal = {Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine},
year = {2026},
volume = {240},
number = {8},
pages = {805--819},
doi = {10.1177/09544119261464324}
}
EUVIMED