EUVIMEDEUVIMED entdecken
Crossref

Effect of ultrasonic vibration frequency on material removal mechanism and surface finishing performance of additively manufactured fuel nozzles during abrasive flow machining

Junye Li, Weiyang Fang, Mei Zhu, Haihong Wu, Gaopeng Shuai, Bin Lv, Zengwei Zhou, Chuanfeng Wang, Xiaobin He, Liang Xu, Jikun Hou, Guiling Wu und 4 weitere

Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · 14.11.2026

DOI: 10.1177/09544100261508148 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, online erschienen am 14.11.2026. Verfasst von Junye Li und 15 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Gefördert von: The Science and technology development plan project of Jilin province, The Gan-Po Talent Support Program of Jiangxi Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additively manufactured aerospace fuel nozzles possess complex internal channels and superior structural integration; however, their practical application is restricted by poor surface quality caused by powder adhesion and the balling effect during additive manufacturing. Ultrasonic-assisted abrasive flow machining (UAAFM) provides a promising solution for improving the surface integrity of such complex components, while the influence mechanism of ultrasonic parameters on abrasive flow behavior and material removal remains insufficiently understood.In this study, a coupled acoustic–flow–particle numerical model was developed to investigate the effect of ultrasonic vibration frequency on the machining characteristics of additively manufactured fuel nozzles. The transient interaction among ultrasonic excitation, abrasive flow behavior, and particle transport was analyzed based on a turbulence model, non-Newtonian abrasive medium model, and Lagrangian particle tracking method. The effects of ultrasonic frequencies ranging from 25 to 80 kHz on velocity distribution, dynamic pressure, wall stress, and abrasive particle motion were systematically investigated. Furthermore, experimental investigations under ultrasonic frequencies of 0–80 kHz were performed using laser confocal microscopy and scanning electron microscopy to validate the simulation results.The results demonstrate that ultrasonic vibration significantly enhances abrasive particle activity and improves the micro-cutting capability during abrasive flow machining. An optimal machining condition was achieved at 25 kHz, where enhanced flow disturbance, acoustic cavitation-assisted effects, and abrasive impact behavior reached a favorable balance. Under this condition, the surface roughness was reduced to 0.268 μm, representing approximately 90% improvement compared with conventional abrasive flow machining without ultrasonic assistance. Excessively high ultrasonic frequencies weakened the effective energy transfer due to increased attenuation, resulting in reduced material removal capability.This work provides new insights into the frequency-dependent material removal mechanism in ultrasonic-assisted abrasive flow machining and offers an effective strategy for precision finishing of additively manufactured aerospace components with complex internal structures.

Förderung

  • The Science and technology development plan project of Jilin province
  • The Gan-Po Talent Support Program of Jiangxi Province

Zitieren

APA

Li, J., Fang, W., Zhu, M., Wu, H., Shuai, G., Lv, B., Zhou, Z., Wang, C., He, X., Xu, L., Hou, J., Wu, G., Meng, Q., Zhao, Z., Liu, J., & Zhao, W. (2026). Effect of ultrasonic vibration frequency on material removal mechanism and surface finishing performance of additively manufactured fuel nozzles during abrasive flow machining. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. https://doi.org/10.1177/09544100261508148

Vancouver

Li J, Fang W, Zhu M, Wu H, Shuai G, Lv B, et al. Effect of ultrasonic vibration frequency on material removal mechanism and surface finishing performance of additively manufactured fuel nozzles during abrasive flow machining. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 2026. doi:10.1177/09544100261508148

BibTeX
@article{Li2026,
  author = {Li, Junye and Fang, Weiyang and Zhu, Mei and Wu, Haihong and Shuai, Gaopeng and Lv, Bin and Zhou, Zengwei and Wang, Chuanfeng and He, Xiaobin and Xu, Liang and Hou, Jikun and Wu, Guiling and Meng, Qingxin and Zhao, Zhenguo and Liu, Jianhe and Zhao, Weihong},
  title = {Effect of ultrasonic vibration frequency on material removal mechanism and surface finishing performance of additively manufactured fuel nozzles during abrasive flow machining},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering},
  year = {2026},
  doi = {10.1177/09544100261508148}
}
Kostenlos starten →