EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Recent Research Progress in the Abrasive Machining and Finishing of Additively Manufactured Metal Parts

Tesfaye Mengesha Medibew iD, Dawid Zieliński iD, Sisay Workineh Agebo iD, Mariusz Deja iD

Materials · 12.03.2025 · 18 (6) · 1249

DOI: 10.3390/ma18061249 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 12.03.2025. Verfasst von Tesfaye Mengesha Medibew und 3 weiteren Autor:innen. Beteiligte Einrichtung: Doctoral School, Gdańsk University of Technology, Gabriela Narutowicza Street 11/12, 80-233 Gdansk, Poland. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 97 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission in the framework HORIZON-WIDERA-2021-ACCESS-03, project 101079398 'New Approach to Innovative Technologies in Manufacturing (NEPTUN)', European Commission in the framework HORIZON-WIDERA-2021-ACCESS-03, GDAŃSK TECH CORE EDU FACILITIES.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) has revolutionized the production of complex geometrical parts with metals; however, the usual layer-by-layer deposition results in poor surface quality and unpredictable surface integrity. Abrasive machining and finishing techniques play vital roles in counteracting these challenges and qualifying AM parts for practical applications. This review aims to present recent research developments concerning the machining of additively manufactured metal parts via both conventional and nonconventional abrasive machining methods. Conventional methods such as grinding, milling, polishing, honing, and sandblasting have been widely investigated for their ability to enhance the surface finish, dimensional accuracy, and mechanical properties of AM metal components. However, the characteristic features of various AM processes, such as porosity, microstructural features, and residual stresses, can significantly influence the machinability of the produced parts. Nonconventional methods such as abrasive flow machining, electrochemical machining, magnetic abrasive finishing, and vibratory bowl finishing, on the other hand, have shown potential in addressing the difficulties associated with internal machining geometries and hard-to-machine material combinations that are typical for many AM parts. This review also highlights some challenges and future trends in the machining of AM metal parts and emphasizes that further research is required in the direction of combinations of various postprocessing techniques, machinability regarding new alloy compositions, and the integration of AI for process optimization. As the demand for high-precision AM parts grows across various industries, the advancement of abrasive machining and finishing techniques is crucial for driving the wider adoption of AM technologies.

Schlagwörter

Stichwörter der Autor:innen

abrasive machiningadditive manufacturingdimensional accuracymechanical propertiesnonconventional methodssurface finish

Autor:innen und Institutionen

  • Doctoral School, Gdańsk University of Technology, Gabriela Narutowicza Street 11/12, 80-233 Gdansk, Poland.
  • Department of Manufacturing and Production Engineering, Institute of Machine and Materials Technology, Faculty of Mechanical Engineering and Ship Technology, Gdańsk University of Technology, Gabriela Narutowicza Street…

ORCID-Profile: Tesfaye Mengesha Medibew, Dawid Zieliński, Sisay Workineh Agebo, Mariusz Deja

Förderung

  • European Commission in the framework HORIZON-WIDERA-2021-ACCESS-03, project 101079398 'New Approach to Innovative Technologies in Manufacturing (NEPTUN)'
  • European Commission in the framework HORIZON-WIDERA-2021-ACCESS-03
  • GDAŃSK TECH CORE EDU FACILITIES

Zitieren

APA

Medibew, T. M., Zieliński, D., Agebo, S. W., & Deja, M. (2025). Recent Research Progress in the Abrasive Machining and Finishing of Additively Manufactured Metal Parts. Materials, 18(6), 1249. https://doi.org/10.3390/ma18061249

Vancouver

Medibew TM, Zieliński D, Agebo SW, Deja M. Recent Research Progress in the Abrasive Machining and Finishing of Additively Manufactured Metal Parts. Materials. 2025;18(6):1249. doi:10.3390/ma18061249

BibTeX
@article{Medibew2025,
  author = {Medibew, Tesfaye Mengesha and Zieliński, Dawid and Agebo, Sisay Workineh and Deja, Mariusz},
  title = {Recent Research Progress in the Abrasive Machining and Finishing of Additively Manufactured Metal Parts},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {6},
  pages = {1249},
  doi = {10.3390/ma18061249}
}
Kostenlos starten →