EUVIMEDEUVIMED entdecken
Crossref

Microstructural evolution and mechanical behavior of modified 9Cr-1Mo steel welds fabricated via hot-wire and activated TIG hybrid technique

Gopa Chakraborty, Vasantharaja Paramasivam, Hemant Kumar, Chitta Ranjan Das, Aniruddha Moitra

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 21.11.2026

DOI: 10.1177/09544089261510552 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 21.11.2026. Verfasst von Gopa Chakraborty und 4 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study introduces an innovative hybrid welding technique combining hot-wire tungsten inert gas (HW-TIG) and activated TIG (A-TIG) processes to fabricate a defect-free joint in 12 mm-thick modified 9Cr-1Mo steel plates. The weld joint is prepared using a “V” groove configuration (35° bevel angle and 6 mm land height), with the land region joined by A-TIG and the remaining “V” groove filled by HW-TIG. The hybrid technique requires only five passes compared to nine passes for standard HW-TIG welding, thereby enhancing productivity. Microstructural analysis reveals that the A-TIG weld metal undergoes favorable in-situ modification, driven by the thermal cycles of successive HW-TIG passes, resulting in a refined microstructure in the hybrid joint. Following post-weld heat treatment, the hybrid weld metal achieves an average microhardness of approximately 240 VHN. The joint exhibits a tensile strength of 630 MPa and Charpy impact toughness of 120 J. Mechanical testing demonstrates notable flexural strength (835 MPa) and stiffness (94 GPa) of the weld in three-point bend tests, while impression creep testing confirms enhanced creep resistance compared to the base metal, with reduced total creep strain. Overall, the proposed hybrid process yields mechanical properties that exceed the minimum requirements for steam generator applications in nuclear power plants, establishing its suitability for joining thicker sections of ferritic steels with possible improvement in productivity and weld quality.

Zitieren

APA

Chakraborty, G., Paramasivam, V., Kumar, H., Das, C. R., & Moitra, A. (2026). Microstructural evolution and mechanical behavior of modified 9Cr-1Mo steel welds fabricated via hot-wire and activated TIG hybrid technique. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261510552

Vancouver

Chakraborty G, Paramasivam V, Kumar H, Das CR, Moitra A. Microstructural evolution and mechanical behavior of modified 9Cr-1Mo steel welds fabricated via hot-wire and activated TIG hybrid technique. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261510552

BibTeX
@article{Chakraborty2026,
  author = {Chakraborty, Gopa and Paramasivam, Vasantharaja and Kumar, Hemant and Das, Chitta Ranjan and Moitra, Aniruddha},
  title = {Microstructural evolution and mechanical behavior of modified 9Cr-1Mo steel welds fabricated via hot-wire and activated TIG hybrid technique},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  doi = {10.1177/09544089261510552}
}
Kostenlos starten →