EUVIMEDEUVIMED entdecken
Crossref

Creep Rupture Strength and Microstructural Changes due to Creep of Mod.9Cr-1Mo Steel with High Initial Hardness

Li Bin Niu, Tomohiro Mori, Yuichi Yamamoto

Materials Science Forum · 01.05.2026 · 1189 · 101-108

DOI: 10.4028/p-djxd5q ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science Forum, online erschienen am 01.05.2026. Verfasst von Li Bin Niu und 2 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate creep rupture properties and microstructural changes due to creep of the Mod.9Cr-1Mo steel with high initial hardness, creep rupture tests were carried out at 600°C and 650°C. The hardness of the gauge and grip portions of the ruptured specimens were also measured. This steel exhibited higher creep rupture strength than the conventional material at the two temperatures, but its creep rupture strength showed a larger decreasing tendency at 650°C. For the specimens ruptured at 600°C, an increasing tendency in lath width and a decreasing one in hardness were confirmed in gauge portions, but they were not observed in grip portions. However, for the specimens ruptured at 650°C, the hardness of both gauge and grip portions tended to decrease with the time to rupture, and the recovery of the lath structure and the coarsening of M 23 C 6 carbides were particularly noticeable in the gauge portions.

Zitieren

APA

Niu, L. B., Mori, T., & Yamamoto, Y. (2026). Creep Rupture Strength and Microstructural Changes due to Creep of Mod.9Cr-1Mo Steel with High Initial Hardness. Materials Science Forum, 1189, 101-108. https://doi.org/10.4028/p-djxd5q

Vancouver

Niu LB, Mori T, Yamamoto Y. Creep Rupture Strength and Microstructural Changes due to Creep of Mod.9Cr-1Mo Steel with High Initial Hardness. Materials Science Forum. 2026;1189:101-108. doi:10.4028/p-djxd5q

BibTeX
@article{Niu2026,
  author = {Niu, Li Bin and Mori, Tomohiro and Yamamoto, Yuichi},
  title = {Creep Rupture Strength and Microstructural Changes due to Creep of Mod.9Cr-1Mo Steel with High Initial Hardness},
  journal = {Materials Science Forum},
  year = {2026},
  volume = {1189},
  pages = {101--108},
  doi = {10.4028/p-djxd5q}
}
Kostenlos starten →