EUVIMEDEUVIMED entdecken
Crossref

An integrated statistical and machine-learning framework for FDM process optimization of PETG/0.5 wt.% graphene composites

Karthikeyan R, Sreebalaji VS, Abishek S, Devid Kumar M

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 10.11.2026

DOI: 10.1177/09544089261505299 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 10.11.2026. Verfasst von Karthikeyan R und 3 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Data-driven optimization of fused deposition modeling (FDM) parameters is often reported from small response-surface datasets, with accuracy computed on the fitting data and without examination of the experimental sequence. The novelty of this study lies in a diagnostic-first framework in which lack-of-fit testing, run-order regression, analysis of covariance, nested leave-one-design-point-out cross-validation, and optimization restricted to the convex hull of the experimental design are all completed before any process recommendation is made. A four-factor, three-level Box–Behnken design of 27 runs was used to study nozzle temperature, layer height, print speed, and raster angle for Polyethylene Terephthalate Glycol (PETG) containing 0.5 wt.% graphene. Tensile strength ranged from 19.32 to 45.50 MPa and flexural strength from 30.14 to 60.92 MPa. The quadratic raster-angle term accounted for 22.8% of the tensile variance ( P = .0023) and remained significant after adjustment for run order ( P = .0011); mean tensile strength at 90° was 25.4% higher than at 45°. Flexural strength declined by 0.602 MPa per run ( P = .0009), and the apparent temperature curvature, which carried 48.9% of the flexural variance, could not be separated from this drift. Nested cross-validated R 2 did not exceed 0.077 for tensile strength and 0.452 for flexural strength, against training values of up to 0.994. Hull-constrained desirability analysis returned 250 °C, 0.16 mm, 45 mm s −1 and 90° as a model-derived candidate with wide prediction intervals, whereas the highest strengths were observed at 270 °C under otherwise identical settings. Sequence diagnostics and held-out validation therefore determine which process conclusions can be relied upon, and the model output is presented as a candidate for confirmation rather than as a validated optimum.

Zitieren

APA

R, K., VS, S., S, A., & M, D. K. (2026). An integrated statistical and machine-learning framework for FDM process optimization of PETG/0.5 wt.% graphene composites. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261505299

Vancouver

R K, VS S, S A, M DK. An integrated statistical and machine-learning framework for FDM process optimization of PETG/0.5 wt.% graphene composites. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261505299

BibTeX
@article{R2026,
  author = {R, Karthikeyan and VS, Sreebalaji and S, Abishek and M, Devid Kumar},
  title = {An integrated statistical and machine-learning framework for FDM process optimization of PETG/0.5 wt.% graphene composites},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  doi = {10.1177/09544089261505299}
}
Kostenlos starten →