Evaluation of Mechanical Properties of Graphene-Reinforced PETG Filaments Fabricated by FDM
Journal of Computers, Mechanical and Management · 30.04.2026 · 5 (2) · 11-24
DOI: 10.57159/jcmm.5.2.25388 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Computers, Mechanical and Management, online erschienen am 30.04.2026. Verfasst von Ram Kishore Shakya und 2 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
In this study, graphene-reinforced polyethylene terephthalate glycol (PETG) composites are fabricated using the Fused Deposition Modeling (FDM) technique. The influence of process parameters, namely layer thickness, print speed, and nozzle temperature, on tensile and flexural strength is investigated. A Taguchi design of experiments is employed to optimize the process parameters, and regression models are developed to predict tensile strength and flexural strength. The optimum combination for tensile strength is identified as a layer thickness of 0.1 mm, print speed of 20 mm/s, and nozzle temperature of 230 °C, while the optimum combination for flexural strength is found at a layer thickness of 0.1 mm, print speed of 20 mm/s, and nozzle temperature of 235 °C. Microstructural characterization performed using Scanning Electron Microscopy (SEM) revealed uniform dispersion of graphene within the PETG matrix and strong interlayer bonding at optimized conditions. Fractography analysis conducted using Field Emission Scanning Electron Microscopy (FE-SEM) confirmed ductile fracture behavior with limited void formation. The developed regression models exhibited strong predictive accuracy, demonstrating their suitability for process optimization and the prediction of mechanical properties.
Zitieren
APA
Shakya, R. K., Mangal, D., & Maurya, N. K. (2026). Evaluation of Mechanical Properties of Graphene-Reinforced PETG Filaments Fabricated by FDM. Journal of Computers, Mechanical and Management, 5(2), 11-24. https://doi.org/10.57159/jcmm.5.2.25388
Vancouver
Shakya RK, Mangal D, Maurya NK. Evaluation of Mechanical Properties of Graphene-Reinforced PETG Filaments Fabricated by FDM. Journal of Computers, Mechanical and Management. 2026;5(2):11-24. doi:10.57159/jcmm.5.2.25388
BibTeX
@article{Shakya2026,
author = {Shakya, Ram Kishore and Mangal, Dharamvir and Maurya, Nagendra Kumar},
title = {Evaluation of Mechanical Properties of Graphene-Reinforced PETG Filaments Fabricated by FDM},
journal = {Journal of Computers, Mechanical and Management},
year = {2026},
volume = {5},
number = {2},
pages = {11--24},
doi = {10.57159/jcmm.5.2.25388}
}
EUVIMED