EUVIMEDEUVIMED entdecken
Crossref

Charpy and drop-weight impact response of Polyurea-coated glass fiber-reinforced composites and their post-impact flexural behavior

İlhan Güler, İbrahim Biliz, Yahya Hışman Çelik

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 26.05.2026

DOI: 10.1177/09544089261451981 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 26.05.2026. Verfasst von İlhan Güler und 2 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to systematically evaluate the influence of fiber orientation and polyurea coating configuration on the fracture toughness and post-impact mechanical performance of glass fiber-reinforced polymer (GFRP) composites. Laminates with fiber orientations of 0°, 15°, 30°, and 45° were fabricated via the hand lay-up method using a 12-ply E-glass fabric (300 g/m 2 ) with a nominal thickness of 3.5 mm to ensure a representative balance between stiffness, damage tolerance, and manufacturability. A portion of the laminates was coated in single- or double-sided configurations to enhance impact energy dissipation and surface damage resistance. Charpy, low-velocity drop-weight, and three-point bending tests were conducted to evaluate fracture toughness, damage resistance, and post-impact residual load-bearing capacity, while a two-way ANOVA was employed to quantify the effects of fiber orientation and coating type. In terms of performance, double-sided polyurea coatings increased energy absorption by up to 8.3%. Under low-velocity drop-weight impact, these coatings increased peak impact loads by up to 26.1% (reaching 17,141 N) and dramatically reduced the visible surface damage area by approximately 84.8% compared to uncoated laminates. Quantitative results from post-impact flexural tests revealed that double-sided coatings significantly enhanced damage tolerance, limiting strength loss to only 7–9% across all fiber orientations. Specifically, at 0° orientation, double-sided coated specimens retained 91% of their initial load capacity, whereas uncoated specimens suffered a drastic 56% strength reduction. These findings demonstrate that dual-side polyurea coatings markedly improve the residual structural integrity of GFRP composites by effectively mitigating impact-induced damage. Fiber orientation strongly influenced damage initiation and propagation in both Charpy and drop-weight tests; this effect was more pronounced in the Charpy impact response, while absorbed energy under drop-weight impact loading showed limited sensitivity to fiber orientation.

Zitieren

APA

Güler, İ., Biliz, İ., & Çelik, Y. H. (2026). Charpy and drop-weight impact response of Polyurea-coated glass fiber-reinforced composites and their post-impact flexural behavior. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261451981

Vancouver

Güler İ, Biliz İ, Çelik YH. Charpy and drop-weight impact response of Polyurea-coated glass fiber-reinforced composites and their post-impact flexural behavior. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261451981

BibTeX
@article{Gler2026,
  author = {Güler, İlhan and Biliz, İbrahim and Çelik, Yahya Hışman},
  title = {Charpy and drop-weight impact response of Polyurea-coated glass fiber-reinforced composites and their post-impact flexural behavior},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  doi = {10.1177/09544089261451981}
}
Kostenlos starten →