Influence of Filler Content and Type on Flexural Strength of Glass Fiber Reinforced Polymer Composites
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi · 27.07.2026 · 17 (2)
DOI: 10.24012/dumf.1890749 ↗Kurz gefasst
Fachartikel in der Zeitschrift Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi, online erschienen am 27.07.2026. Verfasst von Raşit Koray Ergün und 1 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben.
Abstract (Originalsprache)
In this study, the effects of different micro-sized filler types and contents on the flexural behavior of glass fiber-reinforced epoxy composites (GFRCs) were systematically investigated. Aluminum (Al), silicon dioxide (SiO₂), and mica microparticles were dispersed in epoxy at 1.5 wt.%, 3 wt.%, and 4.5 wt.% using hand lay-up technique. Flexural properties of the fabricated GFRCs were evaluated through three-point bending tests in accordance with ASTM D7264 standards. The findings demonstrate that both filler type and content have a remarkable influence on flexural strength of GFRCs. 1.5 wt.% Al-filled GFRCs exhibited the highest flexural strength, with an improvement of approximately 31.7% compared to the unfilled GFRCs. Low contents of microparticles generally enhanced flexural performance, higher contents of microparticles resulted in a reduction in flexural strength due to particle agglomeration, insufficient wetting, and void formation within the matrix. Scanning electron microscopy (SEM) analysis were conducted to examine fractured surface and failure mechanisms. SEM observations indicated that Al-filled GFRCs exhibited stronger fiber–matrix interfacial bonding and reduced fiber pull-out, whereas SiO₂- and mica-filled GFRCs illustrated increased void formation, interfacial debonding, and fiber bundle pull-out. Overall, it was demonstrated that appropriate selection of filler type and optimization of filler content were critical to improve flexural performance of GFRCs.
Zitieren
APA
Ergün, R. K., & Demir, M. E. (2026). Influence of Filler Content and Type on Flexural Strength of Glass Fiber Reinforced Polymer Composites. Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi, 17(2). https://doi.org/10.24012/dumf.1890749
Vancouver
Ergün RK, Demir ME. Influence of Filler Content and Type on Flexural Strength of Glass Fiber Reinforced Polymer Composites. Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi. 2026;17(2). doi:10.24012/dumf.1890749
BibTeX
@article{Ergn2026,
author = {Ergün, Raşit Koray and Demir, Mehmet Emin},
title = {Influence of Filler Content and Type on Flexural Strength of Glass Fiber Reinforced Polymer Composites},
journal = {Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi},
year = {2026},
volume = {17},
number = {2},
doi = {10.24012/dumf.1890749}
}
EUVIMED