EUVIMEDEUVIMED entdecken
Crossref

Hydrophobic properties and chemical state analysis of wear resistant coating prepared by electrical discharge process

Rashi Tyagi, Alok Kumar Das, Amitava Mandal, Kuldeep Kumar Saxena, Ashutosh Tripathi

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 2024-06 · 238 (3) · 1031-1043

DOI: 10.1177/09544089221099240 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 13.05.2022. Verfasst von Rashi Tyagi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 34 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrical discharge coating (EDC) process has been used to prepare a corrosion and wear resistant super-hydrophobic coating on the steel substrate. The coating process has been carried out by using three types of green compact tool electrodes (WS 2 /Cu, MoS 2 /Cu, and hBN/Cu). In these tool electrodes, powder mixing ratios (40:60, 50:50, 60:40) are varied, and their effect on coating characteristics (surface morphology, wettability, corrosion, and wear behaviour) has been studied. In this investigation, the morphology and chemical state of coating has been observed by using a scanning electron microscopy (SEM) and X-ray photoemission spectroscopy (XPS). SEM images of the applied coating show a porous and hierarchical structure. This hierarchical structure helps in raising the contact angle (CA) to 165.6° (super-hydrophobic state). The XPS analysis reveals that the deposition of solid lubricants takes place with their negligible disintegration into non-lubricating compounds. In addition, the prepared coating exhibits excellent resistance to wear and corrosion.

Zitieren

APA

Tyagi, R., Das, A. K., Mandal, A., Saxena, K. K., & Tripathi, A. (2024). Hydrophobic properties and chemical state analysis of wear resistant coating prepared by electrical discharge process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 238(3), 1031-1043. https://doi.org/10.1177/09544089221099240

Vancouver

Tyagi R, Das AK, Mandal A, Saxena KK, Tripathi A. Hydrophobic properties and chemical state analysis of wear resistant coating prepared by electrical discharge process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2024;238(3):1031-1043. doi:10.1177/09544089221099240

BibTeX
@article{Tyagi2024,
  author = {Tyagi, Rashi and Das, Alok Kumar and Mandal, Amitava and Saxena, Kuldeep Kumar and Tripathi, Ashutosh},
  title = {Hydrophobic properties and chemical state analysis of wear resistant coating prepared by electrical discharge process},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2024},
  volume = {238},
  number = {3},
  pages = {1031--1043},
  doi = {10.1177/09544089221099240}
}
Kostenlos starten →